profacer

PROFESSOR ANIL K. BHOWMICK

INTERNATIONAL CENTER FOR POLYMERS AND SOFT MATTER
DEPARTMENT OF CHEMICAL AND BIOMOLECULAR ENGINEERING
THE UNIVERSITY OF HOUSTON, HOUSTON, TX 77204-4004, USA, Phone no: 713-743-9241,
e-mail : akbhowmick@uh.edu anilbhowmick@gmail.com

Research Publications

Publication Year: 1979 -1988 Top

1.

A.K. Bhowmick and S.K. De

Dithiodimorpholine – based accelerator system in tire tread compound for high temperature vulcanization. Rubber Chemistry and Technology, 52, 985 (1979).

2.

A.K. Bhowmick, R. Mukhopadhyay and S.K. De

High temperature vulcanization of elastomers. Rubber Chemistry and Technology, 52, 725 (1979).

3.

R. Mukhopadhyay,
A. K. Bhowmick andS. K. De

Effect of vulcanization temperature and synergism of accelerators on the network structure and technical properties of efficiently vulcanized naturalrubber mixes. Polymer, 19, 1176 (1978).

4.

A.K. Bhowmick and S.K. De

Effect of curing temperature on the technical properties of nitrile rubber and Carboxylated nitrile rubber. Rubber Chemistry and Technology, 53, 107 (1980).

5.

A.K. Bhowmick, S. Basu and S. K. De

Scanning electron microscopy studies of nitrile rubber fractured surfaces. Rubber Chemistry and Technology, 53, 321 (1980).

6.

A.K. Bhowmick, G.B. Nando, S. Basu and S.K. De

Scanning electron microscopy studies of fractured natural rubber surfaces. Rubber Chemistry and Technology 53, 327 (1980).

7.

A.K. Bhowmick and S.K. De

Effect of curing temperature and curing system on structure-property relations of rubber blends. Rubber Chemistry and Technology, 53, 960 (1980).

8.

A.K. Bhowmick and S.K. De

Effect of curing temperature and curing system on the network structure and technical properties of polybutadiene and styrene-butadiene rubbers. Journal of Applied Polymer Science, 26, 529 (1980).

9.

A.K. Bhowmick and S.K. De

Kinetics of crosslinking and network changes in natural rubber vulcanizates with a dithiodimorpholine based accelerator system. Rubber Chemistry & Technology, 53, 1015 (1980).

10.

A.K. Bhowmick, S. Basu and S.K. De

Scanning electron microscopy studies of abraded rubber surfaces. Journal of Materials Science, 16, 1654 (1981).

11.

A.K. Bhowmick

Studies on rubber blends : I  Polymer – solvent Interactions II Mooney – Rivlin Constants. Kautschuk und Gummi Kunststoffe., 34, 558 (1981).

12.

S.K. Chakroborty, A. K. Bhowmick and S.K. De

Structure – Property relations in Carboxylated nitrile rubber. Journal of Applied Polymer Science, 26, 4011 (1981).

13.

P.K. Pal, A. K. Bhowmick and S. K. De

The effects of carbon black – vulcanization system interactions on natural rubber network structures and properties. Rubber Chemistry & Technology, 55, 23 (1982).

14.

V.M. Murthy, A.K. Bhowmick and S.K. De

Fracture property studies of short-fibre reinforced rubber composites. Journal of Materials Science, 17, 709 (1982).

15.

N.M. Mathew, A.K. Bhowmick and S.K. De

Chemical and scanning electron microscopy studies on fatigue failure of natural rubber vulcanizates. Rubber Chemistry & Technology, 55, 51 (1982).

16.

S.K. Chakroborty, A.K. Bhowmick, S.K. De and B.K. Dhindaw

Scanning Electron Microscopy studies of tear of carboxylated nitrile rubber. Rubber Chemistry & Technology, 55, 41 (1982).

17.

N.M. Mathew, A. K. Bhowmick and S.K. De

Network changes in natural rubber vulcanizates under Compression. Journal  of Applied Polymer Science, 27, 1827 (1982).

18.

P.K. Pal, A.K. Bhowmick and 
S.K. De

Scanning electron microscopy studies on failure of natural rubber. International Journal of Polymeric Materials 9(2), 139 (1982).

19.

N.M. Mathew, A.K. Bhowmick, B.K. Dhindaw and S.K. De

Scanning electron microscopy studies on tensile rupture of rubber. Journal of Materials Science, 17(9), 2594 (1982).

20.

S.K. Chakroborty, A.K. Bhowmick and S.K. De

Mixed Crosslinking system in elastomers. Journal of Macromolecular Science, Rev. Macromol. Chem., C21(2), 313 (1982).

21.

A.K. Bhowmick

On the ridge formation in abrasion of elastomers. Rubber Chemistry &  Technology, 55, 1055 (1982).

22.

A.K. Bhowmick, A.N. Gent and C.T.R. Pulford

Tear strength of elastomers under threshold conditions. Rubber Chemistry & Technology, 56, 226 (1983).

23.

A.K. Bhowmick and A.N. Gent

Strength of neoprene compounds and the effect of salt solutions. Rubber Chemistry & Technology, 56, 845 (1983).

24.

A.K. Bhowmick

Modeling of fracture surfaces of elastomers. Kautschuk Gummi Kunststoffe, 37, 191 (1984).

25.

A.K. Bhowmick and A.N. Gent

Effect of interfacial bonding on the self-adhesion of SBR and neoprene. Rubber Chemistry and Technology, 57, 216 (1984).

26.

A.K. Bhowmick, S. Rampalli and D. McIntyre

Effect of resin components on the degradation of guayule rubber, 30, 2367 (1985).

27.

A.K. Bhowmick, S. Kasemsuen, M.Oroz, 
R. Seeger, J. patt, A.MacArthur and D.McIntyre

Residual plant tissues from guayule rubber processing and their effect on properties of natural rubber.Kautschuk and Gummi Kunststoffe, 39, 1075 (1986).

28.

A.K. Bhowmick

Tear strength of polyphosphazene, neoprene, and SBR over a range of rates, temperature and crosslinking: Tearing Energy Spectra. J. Mat. Sci., 21(11), 3927 (1986).

29.

A.K. Bhowmick, C.C. Kuo, A. Manzur, A. MacArthur and D. McIntyre

Properties of cis-and trans polyisoprene blend. J. Macromol. Sci-Phys., B25(3), 283 (1986).

30.

A.A. Phadke, A.K. Bhowmick and S.K. De

Effect of cryoground rubber on properties of NR. J. Appl. Polym. Sci., 32, 4063 (1986).

31.

A. Saha Deuri and A. K. Bhowmick

Ageing of rocket insulator compound based on EPDM. Polymer Degradation and Stability, 16, 221 (1986).

32.

A.K. Bhowmick, J. Cho, A. MacArthur and D. McIntyre

Influence of gel and molecular weight on natural rubber properties. Polymer, 27, 1889 (1986).

33.

A.K. Bhowmick

A new classification system for carbon black. Rubber World, 192(3), 33 (1985).

34.

A.K. Bhowmick

Fractographic investigation of tensile and fatigue fracture surfaces of rubber containing inhomogeneous inclusion. J. Mater. Sci., 5(10), 1042 (1986).

35.

T.K. Pal, A.K. Bhowmick, 
N.C. Samajdar and P.S. Bhargava

Influence of binary antioxidant system on aging properties of natural rubber.Kautschuk and Gummi Kunststoffe, 39, 1192 (1986).

36.

A.K. Bhowmick, S. Rampalli, K. Gallagherrubber and  D. McIntyre

The degradation of guayule rubber – the effect of resin components on degradation at high temperature. J. Appl. Polym. Sci., 33, 1125 (1987).

37.

A.K. Bhowmick

Adhesion of Thiokol rubber to aluminium. Ind. J. Technol., 25, 58 (1987).

38.

A. Saha Deuri and A.K. Bhowmick

Ageing of EPDM rubber. J. Appl. Polym. Sci., 34, 2205 (1987).

39.

A. Saha Deuri and A.K. Bhowmick

Degradation of rocket insulator compound at high temperature. J. Therm. Anal., 32, 755 (1987).

40.

T.K. Bhaumik, B.R. Gupta and  A.K. Bhowmick

Studies on milling behaviour of rubber blends. Plastics and Rubber-Processing and Applications, 7, 43 (1987).

41.

T.K. Bhaumik, B.R. Gupta and  A.K. Bhowmick

Tack and green strength of EPDM and Bromobutyl rubber, PII unfilled Blends. J. Adhesion, 24, 183 (1987).

42.

A.K. Bhowmick, P.P. De and A.K. Bhattacharyya

Adhesive tack and Green strength of EPDM rubber. Polym. Eng. Sci., 27, 1195 (1987).

43.

A. MacArthur, J. Cho, A.K. Bhowmick and D. McIntyre

A Physical model for the prediction of the effect of gel on modulus of rubber. Ind. J. Technol., 25, 41 (1987).

44.

A. Saha Deuri and A.K. Bhowmick

Effect of ageing on critical cut length and morphology of fracturesurface of natural rubber. J. Mat. Sci., 22, 4299 (1987).

45.

P. Loha, A.K. Bhowmick and S.N. Chakravarty

Modification of the peel test for testing of rubber to rubber joints. Polymer Testing, 7, 153 (1987).

46.

T.K. Bhaumik, B.R. Gupta and  A.K. Bhowmick

Tack and Green strength of filled blends of EPDM and Bromobutyl Rubber. Journal of Adhesion Science and Technology, 1(3), 227 (1987).

47.

T.K. Bhaumik, B.R. Gupta and  A.K. Bhowmick

Cut growth behaviour of EPDM and Bromobutyl blends under repeated stressing. J. Mater. Sci., 22, 4336 (1987).

48.

A. Saha Deuri and A.K. Bhowmick

Influence of ageing on strength properties & morphology of fracture surface of hydroxy terminated polybutadiene rubber. Materials Chemistry & Physics, 18, 35 (1987).

49.

A.Saha Deuri, A.K.Bhowmick, B. John and  T.S. Ram

Effect of moulding pressure, cooling rate and curing temperature on the properties of rocket insulator compound. J. Mat. Sci. Letters, 6, 1117 (1987).

50.

A.K. Bhowmick

Threshold fracture of rubber. J. Macromol. Sci. Reviews, C28(3&4), 339 (1988).

51.

A. Saha Deuri and A.K. Bhowmick

Effect of flaw size on tensile rupture of synthetic  rubbers with special reference to rocket insulator compound. Journal of Applied Polymer Science, 35, 327 (1988).

52.

A. Saha Deuri, P.P. De, A.K. Bhowmick and S.K. De

Studies on ageing of EPDM based Rocket Insulator Compound by stress relaxation and the effect of Propellant Binder. Polym. Degrad. and Stability, 20, 135 (1988).

53.

A. Saha Deuri, A.K. Bhowmick, R. Ghosh, B. John, T. Sriram and S.K. De

Thermal and Ablative Properties of Rocket Insulator Compound based on EPDM. Polym. Degradation & Stability, 21, 21 (1988).

54.

N. Roy Choudhury and A.K. Bhowmick

Influence of Interaction Promoter on the Properties of Thermoplastic Elastomeric Blends of Natural Rubber & Polyethylene. J.Mater. Sci., 23, 2187 (1988).

55.

N. Roy Choudhury and A.K. Bhowmick

Adhesion between components & Mechanical Properties of Natural Rubber -Polypropylene Thermoplastic Elastomeric Blends. J. Adh. Sci. & Tech., 2(3), 167 (1988).

56.

T.K. Bhaumik, A.K. Bhattacharyya, 
B.R. Gupta and A.K. Bhowmick

Studies on Blends of EPDM and Bromobutyl Rubber. Plastics & Rubber – Processing & Application, 10, 105 (1988).

57.

T.K. Bhaumik, B.R. Gupta and A.K. Bhowmick

Abrasion of High Temperature Conveyor Belt Compounds Based on Ethylene-Propylene-Diene (EPDM) and Bromobutyl Rubber Blends. WEAR, 128, 167 (1988).

 

Publication Year: 1989 -1993 Top

58.

P. Loha, A.K. Bhowmick and S.N. Chakravarty

Studies on adhesion between natural rubber and polybutadiene rubber. Int. J. Adhesion and Adhesives, 9, 95 (1989).

59.

N. Roy Choudhury and A.K. Bhowmick

Compatibilisation of Natural Rubber – Polyolefin Thermoplastic Elastomeric Blends by Phase Modification. J. Appl. Polym. Sci., 38, 1091 (1989).

60.

P.P. Sarkar, S. Ghosh, B.R. Gupta, A. Sen, A.K. Bhowmick and S. Chakraborty

Studies on Adhesion between rubber & Fabric and Rubber and Rubber in Heat Resistant Conveyor Belt. Int. J. Adhesion & Adhesives, 9, 26 (1989).

61.

A.K. Bhowmick

Effect of model fillers on the strength of pressure sensitive tapes. J. Adhesion Sci. & Technol., 3, 371 (1989).

62.

T.K. Bhaumik, P.P. De, A.K. Bhowmick and B.R. Gupta

Studies on Rheological Behaviour of Blends of Ethylene – Propylene Diene Rubber and Bromobutyl Rubber – Unfilled Systems, Kautschuk Gummi Kunststoffe., 42, 115 (1989).

63.

N. Roy Choudhury and A.K. Bhowmick

Ageing of Natural Rubber. Thermoplastic Elastomeric Composites. Polym. Degradation & Stability, 25, 39 (1989).

64.

N. Roy Choudhury and A.K. Bhowmick

Strength of Thermoplastic Elastomers from rubber-polyolefin blends. J. Mater. Sci., 25, 161 (1990).

65.

N. Roy Choudhury and A.K. Bhowmick

Effect of contact time and temperature on adhesion between components of Rubber – Polyethylene Thermoplastic Composites. J. Adh. Sci., & Technol., 3(3), 225 (1989).

66.

N. RoyChoudhury and A. K. Bhowmick

Studies on Adhesion between Rubber to Rubber joints. Plastics & Rubber – Processing & Application, 11, 99 (1989).

67.

B. Chakraborty and A.K. Bhowmick

Micromechanism of Failure of Thermoplastic Elastomer. J. Mater. Sci., 25, 2985 (1990).

69.

N. Roy Choudhury and A.K. Bhowmick

Thermal, X-ray and dynamic mechanical properties of thermoplastic elastomeric natural rubber-polyethylene blends. Polymer, 30, 2047 (1989).

69.

N.Roy Choudhury and A.K. Bhowmick

Studies on Adhesion between natural rubber & polyethylene  and the role of adhesion promoter. J. Adhesion, 32, 1 (1990).

70.

N.Roy Choudhury and A.K. Bhowmick

Hysteresis of Thermoplastic Rubber Vulcanizate. Plastics & Rubber-Processing & Applications, 11(3), 185 (1989).

71.

T.K. Bhaumik, P.P. De, A.K. Bhowmick and B.R. Gupta

Studies on rheological behaviour of blends of EPDM and bromobutyl rubber-unfilled blends. Ind. J. Technol., 28, 33 (1990).

72.

C. Neogi, A.K. Bhowmick and S.P. Basu

Threshold tensile strength and modulus of carbon black filled rubber vulcanizates. J. Mater. Sci., 25, 3524 (1990).

73.

C. Neogi, A.K. Bhowmick and S.P. Basu

Threshold tearing energy of carbon black filled rubber vulcanizates. J. Appl. Polym. Sci., 39, 917 (1990).

74.

A. Sarkar, A.K. Bhowmick  and S.N. Chakraborty

Development of a new test method for measurement of tack & studies on tack between cap &base compounds using the method. Polymer Testing, 8, 415 (1989).

75.

A. Sen, P.P. De, A.S. Bhattacharyya and 
A.K. Bhowmick

Effect of crosslinking on the crystallization and fusion behaviour of polyethylene-ethylene propylene diene terpolymer blends. Thermochemica-Acta, 157, 45 (1990).

76.

S. Bhattacharyya, B.N. Avasthi and A.K. Bhowmick

Hydrogenation of nitrile rubber using homogeneous palladium (II) catalyst. J. Appl. Polym. Sci., 41, 1357 (1990).

77.

N.Roy Choudhury, T. K. Chaki and A.K. Bhowmick

Thermal Behaviour of Thermo-plastic Elastomeric Natural Rubber-Polypropylene Blends. Thermochemica Acta, 176, 149 (1991).

78.

A. Sarkar and A.K. Bhowmick

Fatigue of Rubber-Rubber Joint and the effect of joint Angle. J. Adhesion Sci. and Technol, 5, 389 (1991).

79.

A.Sarkar, D. Dutta, S. Majumdar and A.K. Bhowmick

Failure induced by stress concentration at Rubber-Rubber Interface. Plastics and Rubber-Processing and Applications, 14, 49 (1990).

80.

S.Bhattacharyya, B. N. Avasthi and A.K. Bhowmick

High Pressure Hydrogenation of Nitrile rubber:Thermodynamics and Kinetics. Ind. Eng. Chem., 30, 1086 (1991).

81.

S.Bhattacharyya, B. N. Avasthi and A.K. Bhowmick

Degradation of hydrogenated nitrile rubber. Polymer Degradation and Stability, 31, 71 (1991).

82.

N.R. Kumar, B.R.Gupta and A.K. Bhowmick

Milling Behaviour of gum and Filled Rubber. Plastics and Rubber-Processing and Applications, 14, 119 (1990).

83.

C. Neogi, S.P. Basu and 
A.K. Bhowmick

Microscopic Studies on the mechanism of Tensile and Tear Fracture of Filled Rubber Vulcanizates at high Temperature and under swollen conditions. Kautschuk und Gummi Kunststoffe., 43, 974 (1990).

84.

C.Neogi, A.K.Bhattacharyya, S.P. Basu and  A.K.Bhowmick

Dynamic Mechanical Analysis of Carbon Black Filled Rubber Vulcanizates under swollen conditions. Rubber Chem. Technology, 63, 651 (1990).

85.

C. Neogi, S.P. Basu and 
A.K. Bhowmick

An Investigation of  the Failure Envelopes of Carbon Black Filled Natural Rubber and SBR Vulcanizates. J. Mater. Sci., 9, 1379 (1990).

86.

C.Neogi, S.P. Basu and 
A.K. Bhowmick

Analysis of Rubber-Filler Interaction at High Temperature by using Strain Amplification Factor. Plastics & Rubber-Processing & Applications, 12, 147 (1989).

87.

A. Sarkar, D. Dutta, S. Majumdar and A.K.Bhowmick

Analysis of non-linear stress strain relationships of large Elastic Deformation of Rubber and Rubber-Rubber Joints. Rubber Chem. Technol., 64, 696 (1991).

88.

T.K. Chaki, A.K. Bhattacharyya and A.K. Bhowmick

Storage Stability of some synthetic rubbers & Epoxidised Natural Rubber.Kautschuk und Gummi Kunststoffe, 43(5), 408 (1990).

89.

A.Sen, B. Mukherjee, A.S. Bhattacharyya, P.P. De and 
A.K. Bhowmick

Preparation and characterization of low halogen and non-halogen Fire Resistant (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC. J. Appl. Polym. Sci., 43, 1673 (1991).

90.

A.Sen, B.Mukherjee, A.S.Bhattacharyya, P.P.De and 
A.K. Bhowmick

Studies on crosslinking of EPDM-PE blends by Thermoanalytical technique. J. Therm. Analysis, 36(1990).

91.

C. Neogi, S.P. Basu and 
A.K. Bhowmick

Fatigue behaviour of carbon black filled rubber vulcanizates at high temperature and under swollen conditions. J. Elastomer and Plastics, 24, 96 (1992).

92.

A. Sarkar and A.K. Bhowmick

Effect of joining on dynamic Mechanical Properties of rubber. Kaustchuk und Gummi Kunststoffe, 44, 948 (1991).

93.

N. Kumar, S.Roy, B.R. Gupta and A.K.Bhowmick

Structural changes in rubber during milling. J. Appl. Polym. Sci., 45, 937 (1992).

94.

S. Bhattacharyya, A.K. Bhowmick and B.N. Avasthi

Hydroformylation of Nitrile Rubber & its Characterization. Die Angewandte Chemie, 198, 1 (1992).

95.

S. Bhattacharyya, A.K. Bhowmick and B.N. Avasthi

Hysteresis loss of swollen Rubber vulcanizates in force-retraction measurement & dynamic mechanical analysis. J.Elastomeric & Plastics, 23, 152, (1991).

96.

A.K. Sen, B. Mukherjee, A.S. Bhattacharyya, P.P. De and 
A.K. Bhowmick

Functionalization of Polyethylene and Ethylene-Propylene Diene Terpolymer in the bulk through dibutyl maleate grafting. Die Angewandte Chemie. 191, 15 (1991).

97.

A.K. Sen, A. S. Bhattacharyya, P.P. De and A.K. Bhowmick

Kinetics of silane grafting and moisture crosslinking of polyethylene and ethylene propylene diene rubber. J. Appl. Polym. Sci., 44, 1153 (1992).

98.

S.Bhattacharya, B.N. Avasthi and A. K. Bhowmick

Preparation of hydrogenated nitrile rubber using palladium acetate catalyst:  its characterization & kinetics, J. Polym. Sci. – Polym.Chem. 30, 471 (1992).

99.

P. Thavamani and A. K. Bhowmick

Wear of tank track pad rubber compounds by various rocks. Rubber Chem. Technol., 65, 31 (1992).

100.

S.Bhattacharya, B.N. Avasthi and A. K. Bhowmick

Homogeneous catalytic hydrogenation of liquid carboxylated nitrile rubber. J.  Polym.  Sci. – Polym. Chem., 30, 1961 (1992).

101.

J. Konar, M. L. Mukherjee and A. K. Bhowmick

Contact angle hysteresis and ESCA studies and aged polyolefins. J. Surf. Sci. and Technol., 8, 331 (1992).

102.

A. Sarkar, S. Majumdar and A. K. Bhowmick

Photoelastic studies on rubber to rubber joints. J. Adhesion, 36, 161 (1991).

103.

P. Thavamani and A. K. Bhowmick

Dynamic mechanical properties of hydrogenated nitrile rubber-effect of  crosslink density, curing system, filler and resin. J. Materials Sci., 27, 3243 (1992).

104.

P. Thavamani and A. K. Bhowmick

Influence of compositional variables and testing variatbles on the wear of Hydrogenated nitrile rubber. J. Materials Sci., 28, 1351 (1993).

105.

P. Thavamani and A. K. Bhowmick

Abrasion of swollen rubber vulcanizates, Plastics, Rubber and Composites. Processing and Applications, 18, 35 (1992).

106.

A. Sarkar and 
A. K. Bhowmick

Fatigue failure of rubber and rubber joints. J.Adhesion, 37, 225 (1992).

107.

S. Maity, A. K. Bhowmick and S.K. De

Quantitative estimation of filler distribution in immiscible rubber blends by mechanical damping studies. Rubber Chem. Technol. 65, 293 (1992).

108.

S.Bhattacharyya, B.N. Avasthi and A.K. Bhowmick

Hydrogenation of liquid carboxylated nitrile rubber: Die Makromolekulare Chemie.

109.

A. Sarkar and A. K. Bhowmick

Tack and diffusion of silicone and EPDM rubber. J. Materials Sci.-Letter, 11, 924 (1992).

110.

J. Konar, A. Sen and A. K. Bhowmick

Characterization of grafted polyethylene by contact angle hysteresis and ESCA studies. J. Appl. Polym. Sci., 48, 1579 (1993).

111.

A.K. Sen, B. Mukherjee, A.S. Bhattacharya, P. P. De and 
A. K. Bhowmick

Degradation of silane and peroxide crosslinked polyethylene and ethylene propylene rubber. Polym. Degrad. & Stability, 36, 281 (1992).

112.

A. Sen, A.S. Bhattacharya, 
P. P. De and A. K. Bhowmick

Thermal properties of silane and peroxide crosslinked polyethylene, ethylene propylene rubber and their blends. J. Thermal Analysis, 39, 887 (1993).

113.

S. Kole, A.K. Bhattacharya and A. K. Bhowmick

Morphology and mechanical properties of silicone-EPDM blends. Plastics, Rubber & Composites – Processing & Applications, 19, 117 (1993).

114.

S. Kole, A.K. Bhattacharya and A. K. Bhowmick

Influence of curative, filler, compatibilizer, domain size and blend ratio on the dynamic mechanical properties of silicone-EPDM blends. J. Appl. Polym., Sci., 48, 529 (1993).

115.

P. Thavamani, D. Khastgir and  A. K. Bhowmick

Development and field performance of tank track pad compound. Plastics, Rubber and Composites-Processing & Applications, 19, 245 (1993).

116.

P. Thavamani and A. K. Bhowmick

Wear of natural rubber and SBR vulcanizates at elevated temperature. Plastics, Rubber & Composites-Processing & Applications, 20, 239 (1993).

117.

P. Thavamani and A. K. Bhowmick

Microscopic studies on the mechanisms of wear of the NR, SBR & HNBR vulcanizates under different conditions. J. Materials Sci., 28, 6318 (1993).

118.

S.Bhattacharya, B.N. Avasthi and A. K. Bhowmick

Hydrogenation of epoxidized natural rubber in presence of palladium acetate catalyst. Polymer, 34, 5168 (1993).

119.

S.Bhattacharya, P.Rajagopalan, B.N. Avasthi and A. K. Bhowmick

Selective hydrogenation of styrene-isoprene-styrene block copolymer by palladium acetate catalyst. J. Appl. Polym. Sci., 49, 1971 (1993).

120.

S.Roy, S. Bhattacharya, B.R. Gupta and A.K. Bhowmick

Solution properties of ENR & HNBR. J.  Macromolecular Sci. – reports, 30 301 (1993).

121.

N.R. Kumar, A.K. Bhowmick and  B.R. Gupta

Viscous and elastic effects during processing of gum and filled natural rubber. Kaustschuk und Gummi Kunststoffe, 45, 531 (1992).

122.

N.R. Kumar, A.K. Bhowmick and B.R. Gupta

Mill processability of polychloroprene and acrylic rubber. Rubber Chem.  Technol., 65, 879 (1992).

123.

N.R. Kumar, A.K. Bhowmick and B.R. Gupta

Rheological behaviour and processability of Neoprene and Acrylic rubber. Polym. Engg. Sci., 33, 1002 (1993).

124.

N.R. Kumar, A.K. Bhowmick and B.R. Gupta

An analysis of rheological behaviour of acrylic and epoxidized natural rubber. J. Polymer Engineering, 13, 105 (1994).

125.

N.R. Kumar, A.K. Bhowmick and B.R. Gupta

Relationship between tensile properties and mill processability of various elastomers. J. Polymer Engineering, 13, 125 (1994).

126.

A. Roychoudhury, P.P. De, 
A.K. Bhowmick and S.K. De

Self-crosslinkable ternary blend of chlorosulfonated polyethylene, epoxidized natural rubber and carboxylated nitrile rubber. Polymer, 33, 4737 (1992).

127.

M. Hassan, A.K. Chandra, R. Mukherjee and A. K. Bhowmick

The effect of partial substitution of cobalt adhesion promoter by post-vulcanization stabilizers on steel cord to rubber adhesion. Rubber World, 207, 25 (1992).

128.

D. Roy, A. K. Bhowmick and  S. K. De

Anisotropy in mechanical and dynamic properties of composites based on carbon fiber filled thermoplastic elastomeric blends of natural rubber and high density polyethylene. Polym. Engg. & Sci., 32, 971 (1992).

129.

D. Roy, A. K. Bhowmick and S.K. De

Dynamic mechanical properties of short carbon fiber filled styrene-isoprene-styrene block copolymer. J. Appl. Polym. Sci., 39, 263 (1993).

130.

A. K. Bhowmick and M.L. Mukherjee

Diffusion of silicone rubber into styrene-butadiene rubber by ESCA studies. J. Material Sci.-Letter. 12, 1502 (1993).

131.

P. Thavamani, D. Khastgir and A. K. Bhowmick

Effect of ageing on strength and wear of tank track pad compounds. Wear. 170, 25 (1993).

132.

P. Thavamani and A. K. Bhowmick

Universal relationship between abradibility, loss modulus and ridge spacing. Rubber Chem Technol., 67, 129 (1994).

133.

A. K. Bhowmick and T. Inoue

Structure development during dynamic vulcanization of hydrogeneted nitrile rubber/nylon blends. J. Appl. Polym. Sci., 49, 1893 (1993).

134.

A.K. Bhowmick, T. Chiba and T. Inoue

Reactive processing of rubber-plastics blends: Role of chemical compatibilizers. J. Appl. Polym. Sci., 50, 2055 (1993).

135.

P. Vongpanish, A.K. Bhowmick and T. Inoue

Structure-property relationship during reactive processing of blends of poly (butylene terephthalate) and functionalized ethylene propylene rubber. Plastics, Rubber and Composites – Processing & Applications, 21, 109 (1994).

136.

R. Santra, G. B. Nando and A. K. Bhowmick

In-situ compatibilization of PE & PDMS rubber blend by using EMA as reactive compatibilizer. J. Appl. Polym. Sci., 49, 1145 (1993).

137.

R. Santra, G. B. Nando and A. K. Bhowmick

Studies on miscibility of blend containing EMA and PDMS rubber blend. Polym. Engg. Sci., 33, 1352 (1993).

 

Publication Year: 1994 -1998 Top

138.

T.K. Chaki, D. Roy, A.B. Majali, V.K. Tikku and A.K. Bhowmick

Dynamic mechanical relaxation in irradiation crosslinked polyethylene grafted with methyl methacrylate. J. Polymer Eng., 13, 17 (1994).

139.

P. Thavamani, A.K. Sen,
D. Khastgir and A.K. Bhowmick

The effect of crosslink density, curing systems, filler and resin on the decomposition of HNBR. Thermochemica Acta., 219, 293 (1993).

140.

T.K. Chaki, R.S. Despande, A.B. Majali and A.K. Bhowmick

Electron beam initiated grafting of methyl methacrylate onto polyethylene: Structure and properties. Die Macromolecular Chemie, 217, 61 (1994).

141.

T.K. Chaki, S. Roy,
R.S. Despande, A.B. Majali, V.K. Tikku, and A.K. Bhowmick

Electron beam initiated grafting of triallyl cyanurate onto polyethylene:  structure & properties. J. Appl. Polym. Sci., 53, 141 (1994).

142.

V.K.Tikku, G.Biswas, R.S. Despande, A.B.Majali, T. K. Chaki and A. K.Bhowmick

Electron beam initiated grafting of Trimethylol propane trimethylacrylate onto polyethylene: structure and properties. Radiation Physics and Chemistry 45, 829 (1995).

143.

S.Kannan, N.M.Mathew,
G. B. Nando and A. K. Bhowmick

Structure-property relationship of interactive blends of epoxidized natural rubber and ethylene methyl acrylate copolymer. Plastics, Rubber and Compo-sites-Processing & Applications, 24, 49 (1995).

144.

S.Kannan, N.M.Mathew,
G.B. Nando and  A.K. Bhowmick

Structure-property relationship of blends of ethylene-co-vinyl acetate and epoxidized natural rubber. J. Elastomer & Plastics, 27, 268 (1995).

145.

J. Konar and A.K. Bhowmick

Surface properties of polyethylene grafted with triallylcyanurate in presence of electron beam. J. Adhesion Science & Technology., 8, 1169 (1994).

146.

N. Roychoudhury and A.K. Bhowmick

Thermostable insulating thermoplastic elastomers from rubber polycarbonate blends. J. Elastomer Plastics, 28, 161 (1996).

147.

S.K. Bhattacharya,
R. K. Singh and A. K. Bhowmick

Crack growth resistance of fluoroelastomer vulcanizates filled with particulate & fiber filler. J. Materials Science., 30, 243 (1994).

148.

S.Kole, R. Santra and A. K. Bhowmick

Studies of in-situ compatibilized blend of silicone and EPDM rubbers. Rubber Chemistry & Technology, 67, 119 (1984).

149.

S.Kole, D.K.Tripathy and A. K. Bhowmick

Influence of nature of diene in the EPDM rubber on the properties of the silicone – EPDM blend. Kautschuk und Gummi Kunststoffe., 47, 910 (1994).

150.

S. Kole, S. Roy and A. K. Bhowmick

Interaction between silicone and EPDM rubbers through functionalization and its effect on properties of the blend. Polymer, 35, 3423 (1994).

151.

S. Kole, S. Roy and A. K. Bhowmick

Influence of chemical interaction on the properties of silicone-EPDM rubber blend. Polymer, 36, 3273 (1995).

152.

S. Kole, S.K.Srivastava,
D. K. Tripathy and A. K. Bhowmick

Accelerated hydrothermal weathering of silicone rubber, EPDM and their blends. J. Appl. Polym. Sci., 54, 1329 (1994).

153.

S.Kole, D.Khastgir,
D.K. Tripathy and A. K. Bhowmick

Effect of ageing on dielectric properties of silicone-EPDM rubber blends. Die Angewandte Macromoleculare Chemie., 225, 21 (1995).

154.

A.K. Chandra, A. Biswas, R.Mukhopadhyay and A.K.Bhowmick

Effect of anion in cobalt promoters on the adhesion between steel cord and rubber compound. J. Adhesion., 44, 177 (1994).

155.

A. K. Chandra, A. Biswas,
R. Mukhopadhaya and A.K. Bhowmick

Effect of anion in cobalt adhesion promoters on physico-mechanical and dynamic-mechanical properties of steel and skim compounds. Plastics, Rubber, Composites – Processing & Applications, 22, 249 (1994).

156.

A.K. Chandra,
R. Mukherjee and A. K. Bhowmick

Studies of dynamic adhesion between steel cord and rubber using a new test method. Polymer Testing, 15, 13 (1996).

157.

A. K. Bhowmick and T. Inoue

Interfacial interaction in polymer blends and its influence on polymer properties. J. Appl. Polym. Sci., 53, 77 (1994).

158.

L. Ganeshan, P. Bhattacharyya and A.K. Bhowmick

Quantitative fractography of rubber by image processing technique. Rubber Chem. Technol., 68, 132 (1995).

159.

L. Ganeshan, P. Bhattacharyya and A.K. Bhowmick

Quantitative measurement of dispersion of carbon black in rubber by an image processing technique. J. Appl. Polym. Sci., 56, 1739 (1993).

160.

S.Kole, R.Santra, B.K. Samantray, D.K. Tripathy, G. B. Nando and A. K. Bhowmick

Grafting of silicone rubber onto polypropylene. Polymer Networks and Blends, 5, 117 (1995).

161.

L. Ganeshan, P. Bhattacharyya and A.K. Bhowmick

Quantitative analysis of domain size in polymer blends by an image processing technique. Polymer Networks and Blends, 5, 151 (1995).

162.

A.K.Bhowmick, J. Konar, S.Kole and S.Narayanan

Surface properties of EPDM, silicone and their blends during ageing. J.  Appl. Polym Sci., 57, 631 (1995).

163.

A.K. Chandra, N.R. Kumar, A.K. Bhattacharya, R. Mukhopadhyay and A. K. Bhowmick

Influence of adhesion promoters on processability of steel-cord skim compound. Kautschuk und Gummi Kunststoffe, 49, 125 (1996).

164.

S. Pal, B. B. Misra and A. K. Bhowmick

High speed wear of conveyor belt rubber compounds by various rocks.  Plastics, Rubber & Composites – Processing & Application, 25, 232 (1996).

165.

A.K.Chandra, R.Mukhopadhyay and A. K. Bhowmick

SEM/EDX studies of the influence of cobalt adhesion promoter on the interface between tyre steel cord and rubber skim compounds. J. Adhesion Sci. & Technol., 10, 431 (1996).

166.

S. K. Dutta, T.K. Chaki and A. K. Bhowmick

Electron beam initiated grafting & crosslinking of ethylene vinyl acetate copolymer: Pt. I – Structural characterization. Rubber Chem. Technol., 69, 120 (1996).

167.

A.K. Chandra, A.S. Deuri,
R. Mukhopadhyay and A. K. Bhowmick

The influence of different metal organic adhesion promoters on the kinetics of vulcanization of steel cord skim formulation.Kautschuk und Gummi Kunststoffe, 50, 106 (1996).

168.

L. Ganesan,P. Bhattacharya and A. K. Bhowmick

Quantitative measurement of roughness of fractured rubber surfaces by an image processing technique. J. Materials Science, 31, 3043 (1996).

169.

A.K. Chandra, J. Konar,
R. Mukhopadhyay, T. B. Ghosh and A. K. Bhowmick

XPS/AES studies of the influence of cation & anion of the organometallic adhesion promoters on the interface between steel cord and rubber skim compounds. J. Materials Sci., 31, 2667 (1996).

170.

K. K. Kar and A. K. Bhowmick

Hysteresis loss in rubber and its relationship with heat generation. J. Appl. Polym. Sci., 64, 1541 (1997).

171.

A.K.Chandra, R. Mukhopadhyay and A. K. Bhowmick

The influence of cation in organometallic boroacylate adhesion promoters on the adhesion between steel cord & rubber skim compound. J. Adhesion, 60, 71 (1997).

172.

S. Dutta, A.K. Bhowmick and T.K. Chaki

Electron beam initiated modification of ethylene vinyl acetate using trimethyl propane trimethacrylate. Polymer, 37, 45 (1996).

173.

S. Dutta, T.K. Chaki,
D. Khastgir and Anil K. Bhowmick

Electron beam initiated grafting & crosslinking of ethylene vinyl acetate: Pt. II- Mechanical and electrical properties. Polymers & Polymer Composite 4, 419 (1996).

174.

S. Dutta, A.K. Bhowmick and T.K. Chaki

Structure-property relationship of ethylene vinyl acetate copolymer grafted with triallyl cyanurate in presence of electron beam irradiation. Radiation Physics & Chemistry, 47, 913 (1996).

175.

A. K. Bhowmick and T. Inoue

Polymer-polymer adhesion in presence of compatibilizer. J. Adhesion, 59, 265 (1996).

176.

A.K. Chanda, R.Mukhopadhyay and A.K.Bhowmick

The influence of cation in organometallic boroacylate adhesion promoters on physico-mechanical and dynamic mechanical properties of steel cord skim rubber compound. J. Elastomer & Plastics, 29, 34 (1997).

177.

J. Konar, S. Kole,
B.N. Avasthi and Anil K. Bhowmick

Wetting behaviour of functionalized silicon and EPDM rubber. J. Appl. Polym. Science, 61, 501 (1996).

178.

I. Ghosh, J. Konar and A.K. Bhowmick

Surface properties of chemically modified polyimide films. J. Adh. Sci. & Technol., 11(6), 877 (1997).

179.

K.K. Kar and A.K.Bhowmick

High strain hystersis of rubber vulcanizates over a range of compositions, rates and temperatures. J. Appl. Polym. Sci., 65, 1429 (1997).

180.

A. Jha and A.K.Bhowmick

Thermoplastic elastomeric blends of polyethylene terephthalate and acrylate rubber: Part I influence of interaction on thermal, dynamic mechanical and tensile properties. Polymer, 17, 4337 (1997).

181.

P. Sen Majumdar and A. K. Bhowmick

Influence of the concentration of trimethylol propane triacrylate on the the electron beam induced surface modification of EPDM rubber. J. Adhesion Sci. & Technol., 11(10), 1321 (1997).

182.

A. Kali Ray, A. Jha and A. K. Bhowmick

Chemical modification of EPDM rubber and its properties. J. Elastomers & Plastics, 29, 201 (1997).

183.

K.K. Kar and A.K. Bhowmick

Analysis of high strain hysteresis loss of non-linear rubbery polymer. Polymer Engineering & Science, 38(1), 38 (1998).

184.

S. Datta, T.K. Chaki, V.K.Tikku, N. Pradhan and A.K.Bhowmick

Heat shrinkage of electron beam modified EVA. Radiation Physics & Chemistry, 50(4), 399 (1997).

185.

S. Ghosh, D. Khastgir and A. K. Bhowmick

Phase modification of SEBS block copolymer by different additives and its effect on morphology, mechanical and dynamic mechanical properties. J. Appl. Polym. Sci., 67, 2015 (1998).

186.

A. Jha and A. K. Bhowmick

Thermoplastic elastomeric blends of Nylon-6/ Acrylate rubber: Influence of interaction on mechanical & dynamic mechanical properties. Rubber Chem. Technol., 70, 798 (1997).

187.

M. De Sarkar, P. P. De and A. K. Bhowmick

Thermoplastic elastomeric hydrogenated styrene-butadiene elastomer: Optimization of reaction conditions, thermodynamics and kinetics. J. Appl. Polym. Sci., 66, 1151 (1997).

188.

I. Banik, A. K. Bhowmick, V.K. Tikku, A.B. Majali and R.S. Deshpande

Effects of electron beam on the structural modification of the copolymeric and the terpolymeric fluorocarbon rubbers. Radiation Physics & Chemistry, 51, 195 (1998).

189.

M. De Sarkar, P. P. De and A. K. Bhowmick

Degradation of hydrogenated styrene-butadiene rubber at high temperature. Rubber Chem. Technol., 70, 855 (1997).

190.

P. Sen Majumdar and A. K. Bhowmick

Surface ands bulk properties of EPDM rubber modified by electron beam irradiation. Radiation Physics & Chemistry, 53, 63 (1998).

191.

A. Jha, A.K. Bhattacharya and A. K. Bhowmick

Melt rheology of thermoplastic elastomeric reactive blend of polyamide 6-acrylate rubber. Polymer Network & Blends, 7, 177 (1997).

192.

M. De Sarkar, P.P. De and A. K. Bhowmick

New Polymeric blend from hydrogenated styrene butadiene rubber and polyethylene. Polymer, 40, 1201 (1999).

193.

I. Banik and A. K. Bhowmick

Dynamic mechanical properties of electron beam modified fluorocarbon rubber. J. Appl. Polym. Sci., 69, 2071 (1998).

194.

S. Ghosh, D. Khastgir and A. K. Bhowmick

Effect of block molecular weight on the mechanical & dynamic mechanical properties of segmented polyamide. Polymer, 39, 3967 (1998).

195.

A. Jha and A. K. Bhowmick

Influence of dynamic vulcanization and phase interaction on the swelling behaviour of the thermoplastic elastomeric blends of Nylon-6 and acrylate rubber in various solvents and oil. J. Appl. Polym. Sci., 69, 2331 (1998).

196.

A. Jha and A. K. Bhowmick

Thermal degradation and ageing behaviour of novel thermoplastic elastomeric Nylon-6/acrylate rubber reactive blends. Polymer Degradation & Stability, 62, 575 (1998).

197.

P. Sen Majumdar and A. K. Bhowmick

Electron beam initiated surface modification of elastomers. J. Adh. Sci. & Technol., 12, 831 (1998).

 

Publication Year: 1999 -2003 Top

198.

I. Banik, S.Dutta,
T. K. Chaki and A. K. Bhowmick

Electron beam induced structural modification of fluorocarbon elastomer in presence of polyfunctional monomer. Polymer, 40, 447 (1999).

199.

K. K. Kar and A. K. Bhowmick

Effect of holding time on high strain hysteresis loss of carbon black filled rubber vulcanizates. Polymer Eng. Science, 38, 1927 (1998).

200.

K. K. Kar and A. K. Bhowmick

Medium strain hysteresis loss of natural rubber and styrene butadiene rubber vulcanizates: A predictive model. Polymer, 40, 683 (1999).

201.

I. Banik and A. K. Bhowmick

Influence of electron beam irradiation on the mechanical properties and crosslinking of fluorocarbon elastomer.Radiation Physics & Chemistry, 54, 135 (1999).

202.

S. Ghosh, D. Khastgir and A. K. Bhowmick

Influence of block molecular weight on the dielectric properties of segmented polyamides. Polymers and Polymer Composites, 6, 323 (1998)

203.

M. De Sarkar, P. P. De and A. K. Bhowmick

Effect of casting solvents on physical properties of hydrogenated styrene-butadiene copolymer. Polymer, 40, 1201 (1999).

204.

I. Banik, T.K. Chaki, V. K. Tikku and A. K. Bhowmick

Effect of electron beam irradiation on the electrical properties of fluorocarbon rubber. Die Ange-wandte Makromolekulare Chemie., 263, 5 (1998).

205.

P. Sen Majumdar and A. K. Bhowmick

Friction behaviour of electron beam modified EPDM rubber surface. Wear.  221, 15 (1998).

206.

S. Ghosh, D. Khastgir, A.K. Bhattacharyya and A. K. Bhowmick

Melt rheology of segmented polyamides: Effect of block molecular weight. J. Appl. Polym. Sci., 71, 1739 (1999)

207.

M. De Sarkar, P. P. De, and A. K. Bhowmick

Influence of styrene content on hydrogenation of styrene-butadiene copolymer. J. Appl. Polym. Sci., 71, 1581 (1999).

208.

A. Jha, A. K. Bhowmick, R. Fujitsuka and T.Inoue

Interfacial interaction and peel adhesion between polyamide and acrylate rubber in thermoplastic elatomeric blends. J. Adh. Sci. Technol., 13, 649 (1999).

209.

A. Jha and A. K. Bhowmick

Crystallisation and thermal properties of thermoplastic elastomeric reactive blends of nylon-6 and acrylate rubber. Polymer and Polymer Composite, 6, 505 (1998).

210.

A. Jha, B. Dutta and A. K. Bhowmick

Effect of fillers and plasticizers on the performance of novel heat and oil resistant thermoplastic elastomers from nylon-6 and acrylate rubber blends. J. Appl. Polym. Sci., 74, 1490 (1999).

211.

M. De Sarkar, P. P. De and A. K. Bhowmick

Influence of hydrogenation and styrene content on the unaged and aged properties of styrene-butadiene copolymers. J. Mat. Sci., 34, 1741 (1999).

212.

M. De Sarkar, P. P. De and A. K. Bhowmick

Diimide reduction of carboxylated styrene-butadiene in latex stage. Polymer, 41, 907 (2000).

213.

I. Banik and A.K. Bhowmick

Electron beam modification of filled fluorocarbon rubber. J. Appl. Polym. Sci., 76, 2016 (2000).

214.

I. Banik and A.K. Bhowmick

Influence of electron beam irradiation on fluoro-carbon rubber vulcanizates. J. Mat. Sci., 35, 3579 (2000).

215.

I. Banik and A.K. Bhowmick

Effect of electron beam irradiation on the properties of crosslinked rubbers. Radiation Phys. Chem., 58, 293 (2000).

216.

K.K. Kar and A. K. Bhowmick

High strain hysteresis loss of rubber vulcanizates under pure shear and constrained extension and influence of filler, Rubber Chem. Tech.,73, 56 (2000).

217.

P. Sen Majumdar and A. K. Bhowmick

Structure-property relationship of electron beam modified EPDM rubber. J. Appl. Polym. Sci., 77, 323 (2000).

218.

P. Sen Majumdar and A. K. Bhowmick

Barrier properties of electron beam modified EPDM rubber. J. Appl. Polym. Sci., 75, 784 (2000).

219.

P. Sen Majumdar and A. K. Bhowmick

Electron beam modification of EPDM rubber and its adhesion behaviour. Polymer Surface Modification, 2, 305 (2000).

220.

S. Ghosh, N. Roychowdhury, G. Holden and A. K. Bhowmick

Influence of block molecular weight on the properties of styrene-ethylene butylene-styrene (S-EB-S) block copolymers. J. Appl. Polym. Sci., 77, 1621 (2000).

221.

S. Ghosh, D. Khastgir and A. K. Bhowmick

Influence of block molecular weight on the adhesion properties of segmented polyamides. J. Adhesion Sci. Technol., 14, 529 (2000).

222.

Subiman Ghosh, D. Khastgir, A. K. Bhowmick and P.G. Mukunda

Thermal degradation and ageing of segmented polyamides. Polym. Deg. and Stab., 67, 427 (2000).

223.

S. Ghosh, D. Khastgir,
A. K. Bhowmick, S. Bandyopadhyay, G. Kao and C.Kok

Atomic force microscopy studies of molded thin films of segmented polyamides. J. Materials Sci., 19, 2161 (2000).

224.

S. Chattopadhyay, T.K. Chaki and A.K. Bhowmick

Heat shrinkability of electron beam modified thermoplastic elastomeric films from blends of ethylene vinyl acetate copolymer and polyethylene. Rad. Phys. Chem., 59(5-6), 501 (2000).

225.

M. A. Kader and A.K. Bhowmick

New miscible elastomer blends from acrylate rubber and fluororubber, Rubber Chem. Technol., 73, 889 (2000).

226.

A. Jha and A.K. Bhowmick

Mechanical & dynamic mechanical thermal properties of heat and oil resistant thermoplastic elastomeric blends of polyethylene terephthalate and acrylate rubber. J. Appl. Polym. Sci., 78, 1001 (2000).

227.

A. Naskar, A.K. Pramanick, R. Mukhopadhyay, S. K. De and A. K. Bhowmick

Characterization of ground rubber tire and its effect on natural rubber compound. Rubber Chem. Technol., 73, 902 (2000).

228.

A. K. Naskar,
A. K. Bhowmick and S. K. De

Thermoplastic elastomeric composition based on ground rubber tire. Polymer Engineering and Science, 41, 1087 (2001).

229.

A. K. Naskar, S. K. De and A. K. Bhowmick

Thermoplastic elastomeric composition based on maleic anhydride grafted ground rubber tire. J. Appl. Polym. Sci., 84, 370 (2002).

230.

P. Nevatia, B. Dutta, A. Jha, A. K. Naskar and A. K. Bhowmick

Thermoplastic elastomers from reclaim rubber and waste plastics. J. Appl. Polym. Sci., 83, 2035 (2002).

231.

S. Chattopadhyay, T. K. Chaki and A. K. Bhowmick

Structural Characterization of electron beam crosslinked thermoplastic elastomeric films from polyethylene and ethylene vinyl acetate copolymer. J. Appl. Polym. Sci., 81, 1936 (2001).

232.

S. Chattopadhyay, D. Khastgir, T. K. Chaki and A. K. Bhowmick

Electrical properties of electron beam modified films of thermoplastic elastomeric LDPE and EVA blends. Polymers and Polymer Composites, 8, 5, 345 (2000).

233.

S. Chattopadhyay,
T. K. Chaki and A. K. Bhowmick

Development of new thermoplastic elastomers from blends of polyethylene and ethylene vinyl acetate copolymer by electron beam technology. J. Appl. Polym. Sci., 79, 1877 (2001).

234.

S. Chattopadhyay, T. K. Chaki, R. N. Ghosh and A. K. Bhowmick

Surface analysis and printability studies on electron beam irradiated thermoplastic elastomeric films from LDPE and EVA blends. J. Adhesion Sci. and Technol., 15, 303 (2001).

235.

S. Chattopadhyay,
T. K. Chaki and A. K. Bhowmick

New thermoplastic elastomer from poly(ethylene-octene) (Engage), poly (ethylene-vinyl acetate) and low-density polyethylene by electron beam technology: mechanical properties and structural characterization. Rubber Chemistry and Technology, 74, 815 (2001).

236.

S. Chattopadhyay,
T. K. Chaki and A. K. Bhowmick

Electron beam modification of thermoplastic elastomeric blends made from polyolefins. J. Materials Science, 36, 4323 (2001).

237.

M. A. Kader  and A. K. Bhowmick

Novel thermoplastic elastomers from fluorocarbon elastomer, acrylate rubber and acrylate plastics. Rubber Chem. Technol., 74, 662 (2001).

238.

M.A. Kader, A. K. Bhattacharya and A. K. Bhowmick

Rheological and mechanical properties of gum and filled blends of acrylate rubber and fluororubber. Polymer and Polymer Composites, 9, 263 (2001).

239.

M.A. Kader, A.K. Bhowmick, T. Inoue and T. Chiba

Morphology, mechanical and thermal behaviour of ACM/FKM/polyacrylate blends. J. Materials Sci., 37, 1503 (2002).

240.

A.K. Naskar, S. K. De and A. K. Bhowmick

Surface chlorination of ground rubber tire and its characterization. Rubber Chem. Technol., 74, 645 (2001).

241.

A. K. Naskar, A. K. Bhowmick and S.K. De

Melt processable rubber: Chlorinated waste tire rubber filled polyvinyl chloride. J. Appl. Polym. Sci., 84, 622 (2002).

242.

A. K. Naskar, A. K. Bhowmick and S.K. De

Effect of chlorination of ground rubber tire on its compatibility with polyvinyl chloride: dielectric studies. J. Appl. Polym. Sci., 84, 993 (2002).

243.

A. K. Naskar, D. P. Gala, S. K. De and A. K. Bhowmick

Thermorheological studies of plasticized polyvinylchloride filled with ground rubber tire and its chlorinated derivative. Kautschuk Gummi Kunststoffe, 65, 164 (2002).

244.

B. Kumar, P.P. De, S.K. De,
D. G. Peiffer and A. K. Bhowmick

Tack and green strength of brominated isobutylene-co-paramethylstyrene and its blends. J. Adh. Sci. and Technol., 15, 1145 (2001).

245.

B. Kumar, P.P. De, S.K. De, D. G. Peiffer and A. K. Bhowmick

Mill processibility of brominated isobutylene-co-paramethylstyrene and its blends with EPDM. J. Appl. Polym. Sci., 82, 1483 (2001).

246.

B. Kumar, P.P. De, S.K. De, D.G. Peiffer, S. Majumdar and A. K. Bhowmick

Influence of fillers and oil on mill processability of brominated isobutylene-co-paramethylstyrene and its blends with EPDM. Polym. Engg. and Sci., 41, 2266 (2001).

247.

B. Kumar, P.P. De, S.K. De, D. G. Peiffer and A. K. Bhowmick

Mill processability of brominated isobutylene-co-paramethyl styrene and its blends in the continuous milling operation. J. Appl. Polym. Sci., 85, 1484 (2002)

248.

R.S. Rajeev, S.K. De, A. K. Bhowmick, G.J.P. Kao and S. Bandyopadhyay

Atomic force microscopy studies of short melamine fiber reinforced EPDM rubber. J. Mat. Sci., 36(11), 2621 (2001).

249.

R.S. Rajeev, A. K. Bhowmick, S.K. De, G.J.P. Kao and S.Bandyopadhyay

New composites based on short melamine fiber reinforced EPDM rubber. Polymer Composites, 23, 574 (2002).

250.

R.S. Rajeev, S. K. De and A. K. Bhowmick

Rheological properties of short melamine fiber filled EPDM rubber. Plastics, Rubber and Composites, 30, 294 (2001).

251.

R.S. Rajeev, S. K. De, A. K. Bhowmick, B. Gong and S. Bandyopadhyay

Atomic force microscopy, x-ray diffraction, electron spectroscopy and thermal studies of melamine fiber. J. Adhesion Sci. Technol., 16(14), 1957 (2002).

252.

R.S. Rajeev, A. K. Bhowmick, S.K. De and S. Bandyopadhyay

Effect of crosslinking system on the properties of short melamine fiber filed maleated EPDM rubber composites with special reference to atomic force microscopic and scanning electron microscopic studies. J. Appl. Polym. Sci., 89(5), 1211 (2003).

253.

R.S. Rajeev, S. K. De, A. K. Bhowmick and Baby John

Studies on thermal degradation of short melamine fiber reinforced EPDM, maleated EPDM and nitrile rubber composites. Polym. Degrad. Stab., 79, 449 (2003).

254.

R.S. Rajeev, A. K.Bhowmick, S. K. De and S. Bandyopadhyay

Short melamine fiber filled nitrile rubber composite. J. Appl. Polym. Sci., 90, 544 (2003)

255.

B. Kumar, P.P. De, S.K. De, D. G. Peiffer and A. K. Bhowmick

Rheological behaviour of isobutylene-co-para methyl styrene: effect of fillers, oil and blending with EPDM. Polymer Engg. Sci., 42, 2306 (2002)

256.

S. Ray and A. K. Bhowmick

Novel electron beam modified surface coated silica fillers: Physical and Chemical characteristics. J. Appl. Polym. Sci., 83, 2255 (2002).

257.

S. Ray and A. K. Bhowmick

Synthesis, characterization and properties of montmorillonite clay-polyacrylate hybrid material and its effect on the properties of engage-clay hybrid composite. Rubber Chem. Technol., 74, 835 (2001).

258.

A. M. Shanmugharaj and A. K. Bhowmick

Modification of dual phase filler by electron beam irradiation: Physical characterization. Rubber Chem. Technol., 75, 605 (2002).

259.

A. M. Shanmugharaj,
A. K. Bhowmick, K.S.S. Sarma, A.B.Majali and V.K.Tikku

Surface characterization of electron beam modified dual phase filler by ESCA, FT-IR and surface energy. J. Mat. Sci., 37, 2781 (2002).

260.

A. K. Bhowmick and J.R. White

Themal, UV- and sunlight ageing of thermoplastic elastomeric natural rubber-polyethylene blends. J. Materials Sci., 37, 5141 (2002).

261.

A. K. Bhowmick, J. Heslop and J.R. White

Effect of stabilizers in photodegradation of thermoplastic elastomeric rubber-polyethylene blends – a preliminary study. Polymer Degradation and Stability, 74, 513 (2001).

262.

A. K. Bhowmick, J. Heslop and J.R. White

Photodegradation of thermoplastic elastomeric rubber-polyethylene blends. J. Appl. Polym. Sci., 86, 2393 (2002).

263.

M. Pramanik, S.K. Srivastava, B.K. Samantaray and A. K. Bhowmick

Preparation and properties of ethylene vinyl acetate-clay hybrids. J. Mat. Sci. Letters, 20, 1377 (2001).

264.

M. Pramanik, S.K. Srivastava, B.K. Samantaray and A. K. Bhowmick

Synthesis and characterization of organosoluble thermoplastic elastomer/clay nanocomposites. J. Polym. Sci. Part B Polymer Physics, 40, 2065 (2002).

265.

S. Sadhu and A. K. Bhowmick

Effect of chain length of amine and nature and loading of clay on styrene butadiene rubber-clay nanocomposites. Rubber Chem. Technol., 76, 860 (2003).

266.

A. M. Shanmugharaj and A. K. Bhowmick

Influence of novel electron beam modified surface treated dual phase filler on rheometric and mechanical properties of styrene butadiene rubber vulcanizates. Rubber Chem. Technol., 76, 299 (2003).

267.

A. M. Shanmugharaj and A. K. Bhowmick

Dynamic mechanical properties of styrene butadiene rubber vulcanizate filled with electron beam modified surface treated dual phase filler. J. Appl. Polym. Sci., 88, 2992 (2003).

268.

S. Roy, A. M. Shanmugharaj and A. K. Bhowmick

A new parameter for interpretation of polymer-filler and filler-filler interactions in rubber vulcanizates. J. Materials Science Letters, 21, 1097 (2002).

269.

D.K. Setua, C. Soman, A.K. Bhowmick and G.N. Mathur

Oil resistant thermoplastic elastomers of nitrile rubber and high density polyethylene blends. Polym. Engg. Sci. 42, 10 (2002).

270.

C. Jacob, P. P. De, A. K. Bhowmick and S.K. De

Recycling of EPDM waste.I. Effect of ground EPDM vulcanizate on properties of EPDM rubber. J. Appl. Polym. Sci., 82, 3293 (2001).

271.

M. Pramanik, S.K. Srivastava, B. K. Samataray and A. K. Bhowmick

Rubber-clay nanocomposites by solution blending. J. Appl. Polym. Sci., 87, 2216 (2003).

272.

C. Jacob, P.P. De, A.K. Bhowmick and S.K. De

Recycling of EPDM waste.II.  Replacement of virgin rubber by ground EPDM vulcanization in EPDM/PP thermoplastic elastomeric composition. J. Appl. Polym. Sci., 82, 3304 (2001).

273.

C. Jacob, A. K. Bhowmick, P.P. De and S.K. De

Recycling of EPDM waste.III. Processability of EPDM rubber compound containing ground EPDM vulcanizates. J. Appl. Polym. Sci., 87, 2204 (2003).

274.

C. Jacob, A. K. Bhowmick, P.P. De and S.K. De

Studies on ground EPDM vulcanizate as a filler in window seal compound. Plastics, Rubber Composites, 31, 212 (2002).

275.

C. Jacob, A. K. Bhowmick, P.P. De and S.K. De

Utilization of powdered EPDM scrap in EPDM compound. Rubber Chem. Technol., 76, 36 (2003)

276.

A. Ghosh, P. Antony, A. K. Bhattacharya, A. K. Bhowmick and S.K. De

Replacement of virgin rubbers by waste ground vulcanizates in blends of silicone rubber and fluororubber based on tetrafluoroethylene/propylene/vinylidene fluoride terpolymer. J. Appl. Polym. Sci., 82, 2326 (2001)

277.

A. Ghosh, R.S.Rajeev, A. K. Bhattacharya, A. K. Bhowmick, S.K. De, B. Wolpensinger and S. Bandyopadhyay

Atomic force microscopic studies on microheterogeneity of blends of silicone rubber and tetrafluoroethfylene/ propylene/vinylidene fluoride terpolymer. Rubber Chem. Technol., 76, 220 (2003).

278.

A. Ghosh, A. K. Bhattacharya, A. K. Bhowmick and S.K. De

Effect of ground fluororubber vulcanizate powder on the properties of fluororubber compound. Poly. Engg. Sci., 43, 267 (2003).

279.

A. Ghosh, R.S. Rajeev, A. K. Bhattacharya, A. K. Bhowmick and S.K. De

Recycling of silicone rubber waste: Effect of ground silicone rubber vulcanizate powder on the properties of silicone rubber compound. Polym. Engg. Sci., 43, 279 (2003).

280.

S. Ray and A. K. Bhowmick

Novel electron-beam modified surface coated silica fillers: physical and chemical characteristics. J. Appl. Polym. Sci., 83, 2255 (2002).

281.

S. Ray and A. K. Bhowmick

Electron-beam-modified surface coated clay: influence on mechanical, dynamic mechanical and rheological properties of ethylene-octene copolymer. Radiat. Phys. Chem., 65, 259 (2002).

282.

S. Ray, A. K. Bhowmick, K.S. S. Sarma, A.B. Majali and V.K. Tikku

Characterization of electron-beam-modified surface coated clay fillers and their influence on physical properties of rubbers. Radiat. Phys. Chem., 65, 627 (2002).

283.

S. Ray and A. K. Bhowmick

Influence on untreated and novel electron-beam-modified surface coated silica filer on dynamic mechanical thermal properties of ethylene-octene copolymer. Polym. Eng. Sci., 44, 163 (2004).

284.

S. Ray, A. K. Bhowmick and S. Swayajith

Influence of untreated and novel electron-beam-modified surface coated silica filler on thermo-rheological properties of ethylene-octene copolymer. J. Appl. Polym. Sci., 90, 2453 (2003).

285.

S. Ray and A. K. Bhowmick

Influence of untreated and novel electron-beam-modified surface coated silica filler on rheometric and mechanical properties of ethylene-octene copolymer. J. Mat. Sci., 38, 3199 (2003).

286.

S. Ray, A. K. Bhowmick and S. Bandyopadhyay

Atomic force microscopy studies on morphology and distribution of surface modified silica and clay fillers in an ethylene-octene copolymer rubber. Rubber Chem. Technol., 76, 1091 (2003).

287.

A.M. Shanmugharaj and A.K. Bhowmick

Rheological properties of styrene-butadiene rubber filled with novel electron beam modified surface treated dual phase filler. Radiation Phys. Chem., 69, 91 (2004).

288.

A. M. Shanmugharaj,
S. Ray, S. Bandyopadhyay and A.K. Bhowmick

Surface morphology of styrene-butadiene rubber vulcanizate filled with novel electron beam modified dual phase filler by atomic force microscopy. J. Adhesion Science and Technology, 17, 1167 (2003).

289.

S. Anandhan, P. P. De, S.K. De and A.K. Bhowmick

Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile) : Part 1 : effect of mixing sequence and dynamic vulcanization on mechanical properties. J. Appl. Polym. Sci., 88, 1976 (2003).

290.

S. Anandhan, P. P. De, A. K. Bhowmick, S. Bandyopadhyay and S.K. De

Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile) : Part 2 : replacement of nitrile rubber by its vulcanizate powder. J. Appl. Polym. Sci., 90, 2348 (2003).

291.

S. Anandhan, P. P. De, S. K. De, S. Bandyopadhyay and A.K. Bhowmick

Mapping of thermoplastic elastomeric nitrile rubber/poly(styrene-co-acrylonitrile) blends using tapping mode atomic force microscopy and transmission electron microscopy. J. Mat. Sci., 38, 2793 (2003).

292.

S. Anandhan, P.P. De, S.K. De, S. Bandyopadhyay and A.K. Bhowmick

Novel thermoplastic elastomers based on acrylonitrile-butadiene-styrene terpolymer (ABS) from waste computer equipment and nitrile rubber. Rubber Chem. Technol., 76, 1145 (2003).

 

Publication Year: 2004 – 2010 Top

293.

S. Anandhan, S. K. De, P. P. De, S. Swayajith and A. K. Bhowmick

Thermorheological properties of thermoplastic elastomeric blends of nitrile rubber/poly(styrene-co-acrylonitrile) containing waste nitrile rubber vulcanizate power. Kautschuk und Gummi Kunstst., 11, 599 (2004).

294.

S. Anandhan, S.K. De, P. P. De, S. Swayajith and A. K. Bhowmick

Thermorheological studies of novel thermoplastic elastomeric blends of nitrile rubber (NBR) and scrap computer plastics (SCP) based on acrylonitrile-butadiene-styrene terpolymer (ABS). Plast. Rubber Comp. Process. Appln., 32, 377 (2003).

295.

S. Sadhu and A.K. Bhowmick

Preparation and properties of styrene butadiene rubber based nanocomposite: Influence of structural and processing parameters. J. Appl. Polym. Sci., 92, 698 (2004).

296.

S. Sadhu and A.K. Bhowmick

Preparation and properties of nanocomposites based on acrylonitrile butadiene rubber, styrene butadiene rubber and polybutadiene rubber. J. Polym. Sci. Part B: Polymer Physics, 42, 1573 (2004).

297.

S. Sadhu and A.K. Bhowmick

Morphological study of rubber based nanocom-posites by transmission electron microscopy and atomic force microscopy. J. Materials Science, 40, 1633 (2005).

298.

S. Anandhan, S.K. De, P.P. De and A. K. Bhowmick

Thermal degradation and swelling of thermoplastic elastomeric nitrile rubber/poly (styrene-co-acrylonitrile) and nitrile rubber/ABS-based scrap computer plastics blends. Plastics, Rubbers, Comp. – Process. Appl., 32, 377 (2004).

299.

V. Vijayabaskar, S. Bhattacharya, V.K. Tikku and A.K. Bhowmick

Electron beam initiated modification of acrylic elastomer in presence of polyfunctional monomers. Radiation Physics and Chemistry, 71, 1045 (2004).

300.

V. Vijayabaskar, F. R. Costa and A.K. Bhowmick

Influence of electron beam irradiation as one of the mixed crosslinking systems on the structure and properties of nitrile rubber. Rubber Chem. Technol., 77, 624 (2004).

301.

V.Vijayabaskar, R.Gupta, P.P. Chakrabarti, A. K. Bhowmick,

Prediction of properties of rubber by using artificial neural networks. Journal of Applied Polymer Science, 100,  2227 (2006).

302.

A. Bandyopadhyay, A.K. Bhowmick and M. DeSarkar

Synthesis and characterization of acrylic rubber/ silica hybrid composites prepared by sol-gel technique. J. Appl. Polym. Sci., 93, 2579 (2004).

303.

A. Bandyopadhyay, M. DeSarkar and A. K. Bhowmick

Poly(vinylalcohol)/silica hybrid composites by sol-gel technique: synthesis and properties. J. Materials Sci., 40, 12 (2005)

304.

S. Sadhu and A.K. Bhowmick

Effect of nanoclay on the dynamic mechanical properties of styrene butadiene and acrylonitrile rubber vulcanizates. Rubber Chem. Technol., 78, 321 (2005).

305.

S. Sadhu and A.K. Bhowmick

Unique rheological behaviour of rubber based nanocomposites. J. Polymer Sci.: Part B, Polymer Physics, 43, 1854 (2005).

306.

V. Vijayabaskar and A.K. Bhowmick

Dynamic mechanical analysis of electron beam irradiated sulfur vulcanized nitrile rubber network – some unique features. J. Materials Sci., 40, 2823 (2005).

307.

R. Sengupta, V. K. Tikku, A. K. Somani, T. K. Chaki and A. K. Bhowmick

Electron beam irradiated polyamide-6,6 films —characterization by wide angle X-ray scattering and infrared spectroscopy. Radiat. Phys. Chem., 72, 625 (2005).

308.

R. Sengupta, V. K. Tikku, A. K. Somani, T. K. Chaki and A. K. Bhowmick

Electron beam irradiated polyamide-6,6 films—mechanical and dynamic mechanical properties and water absorption behaviour. Radiat. Phys. Chem., 72, 751 (2005).

309.

R. Sengupta, S. Sabharwal, V.K. Tikku, A.K. Somani, T.K. Chaki and A.K. Bhowmick

Effect of ambient-temperature and high-temperature electron-beam radiation on the structural, thermal, mechanical, and dynamic mechanical properties of injection-molded polyamide-6,5, J. Appl. Polym. Sci., 99(4), 1633 (2006).

310.

R. Sengupta, A. Bandyopadhyay, S. Sabharwal, T. K. Chaki and A. K. Bhowmick

Novel Polyamide-6,6/Silica Hybrid Nanocomposites by Sol-Gel Technique: Structure-Property Correlation. Polymer, 46, 3343 (2005).

311.

M. Pramanik, S. K. Srivastava, B. K Samantaray and A. K.      Bhowmick

Preparation and properties of ethylene-vinyl acetate-clay hybrids. J. Mater. Sc. Lett. 20, 1377 (2001).

312.

M. Pramanik, S. K. Srivastava, B. K Samantaray and A. K      Bhowmick

Synthesis and characterization of organo soluble thermoplastic elastomer/ clay nanocomposites. J. Polym. Sci. Part B: Polym. Phys., 40, 2065 (2002).

313.

M. Pramanik, S. K. Srivastava, B. K Samantaray and A. K.      Bhowmick

EVA/Clay nanocomposite by solution blending: effect of aluminosilicate layers on mechanical and thermal properties. Macromol. Res., 11, 260 (2003).

314.

H. Acharya, M. Pramanik, S. K. Srivastava and A. K.Bhowmick

Synthesis and evaluation of high performance EPDM/organoclay nanoscale comopsites. J. Appl. Polym. Sci., 93, 2429 (2004).

315.

S. Nayak, A.K. Bhowmick, S.K. Pal and A.K. Chandra

Wear behaviour of silica filled color tread compounds by various rock surfaces. Rubber Chem. Technol., 78(4), 705 (2005).

316.

S. Guhathakurta, S. Anandhan, N. K. Singha, R.N. Chattopadhyay and A. K. Bhowmick

Waste natural gum as a multifunctional additive in rubber. Journal of Applied Polymer Science, 4897, 102 (2006).

317.

S. Saha, N.K. Singha, R.N. Chattopadhyay, A. Ganguly and A.K. Bhowmick

Studies of terminalia bellerica (Bahera), a natural gum, as an additive in a water-based adhesive composition. J. Adh. Sci. Technol., 19(15), 1349 (2005).

318.

A.M. Shanmugharaj, R.N. Chattopadhyay, N.K. Singha and A.K. Bhowmick

Studies on the adhesion behaviour of water-based adhesives blended with asan gum. J. Adh. Sci Technol., 19(8), 639 (2005).

319.

M. Maiti, S. Sadhu and A.K. Bhowmick

Brominated poly(isobutylene-co-para-methyl-styrene) (BIMS)-clay nanocomposites: synthesis and characterization. J. Polym. Sci. Part B: Polym. Phys., 42, 4489 (2004).

320.

M. Maiti, S. Sadhu and A.K. Bhowmick

Effect of carbon black on properties of rubber nanocomposites. J. Appl. Polym. Sci., 96, 443 (2005).

321.

M. Maiti, S. Sadhu and A.K. Bhowmick

Effect of carbon black on properties of rubber nanocomposites. J. Appl. Polym. Sci., 96(2), 443 (2005).

322.

M. Maiti, A. Bandyopadhyay and A. K. Bhowmick

Preparation and characterization of nanocomposites based on thermoplastic elastomers from rubber-plastic blends. Journal of Applied Polymer Science, 99, 1645 (2006). 

323.

A.K. Bhowmick, S. Ray. A.M. Shanmugharaj, J. Heslop, N. Koppen and J.R. White

Photomechanical degradation of thermoplastic elastomers. J. Appl. Polym. Sci., 99(1), 150 (2006).

324.

A. Bandyopadhyay, M. DeSarkar and A.K. Bhowmick

Solution rheology of poly(vinyl alcohol) silica hybrid nanocomposites. Polymers and Polymer Composites, 13, 429 (2005).

325.

A. Bandyopadhyay, M. DeSarkar and A.K. Bhowmick

Structure-property relationship in sol-gel derived polymer/silica hybrid nanocomposites prepared at various pH. J. Materials Sci., 41, 5981 (2006).

326.

A. Bandyopadhyay, M. DeSarkar and A.K. Bhowmick

Effect of reaction parameters on the structure and properties of acrylic rubber/silica hybrid nanocomposites prepared by sol-gel technique. J. Appl. Polym. Sci., 95, 1418 (2005).

327.

A. Bandyopadhyay, M. DeSarkar and A.K. Bhowmick

Epoxidized natural rubber/silica hybrid nanocomposites by sol-gel technique: effect of reactants on the structure and the properties. J. Materials Sci., 40, 53 (2005).

328.

A. Bandyopadhyay, M. DeSarkar and A.K. Bhowmick

Epoxidized natural rubber/silica nanoscale organic-inorganic hybrid composites prepared by sol-gel technique. Rubber Chem. Technol., 77, 830 (2004).

329.

V. Vijayabaskar and A.K. Bhowmick

Electron beam modification of nitrile rubber in presence of polyfunctional monomer. J. Appl. Polym. Sci., 95, 435 (2005).

330.

V. Vijayabaskar, V.K. Tikku and A.K. Bhowmick

Electron beam modification and crosslinking: Influence of nitrile and carboxyl contents and level of unsaturation on structure and properties of nitrile rubber. Radiation Phys. Chem., 75(7), 779 (2006).

331.

A.K. Naskar, S.K. De and A.K. Bhowmick

Influence of maleation of ground rubber tyre (GRT) on the thermorheological behaviour of thermoplastic elastomers based on ethylene propylene diene rubber, GRT and ethylene-co-acrylic acid. Polymers & Polymer Composites, 10(6), 427 (2002).

332.

M.A. Kader and A.K. Bhowmick

Thermal ageing, degradation and swelling of acrylate rubber, flurorubber and their blends containing polyfunctional acrylates. Polymer Degradation and Stability, 79(2), 283 (2003).

333.

M.A. Kader, A.K. Bhattacharya and A. K. Bhowmick

Arylic rubber-fluorocarbon rubber miscible blends: Effect of curatives and fillers and fillers on cure, mechanical, aging and swelling properties. J. Appl. Polym. Sci., 8 (5), 1442 (2003).

334.

M.A. Kader, A.K. Bhowmick, T. Inoue and T. Chiba

Effect of filler on the mechanical, dynamic mechanical, and aging properties of binary and ternary blends of acrylic rubber, fluorocarbon rubber and polyacrylate. J. Appl. Polym. Sci., 90(1), 278 (2003).

335.

A.K. Naskar, S. K. De and A. K. Bhowmick

Preparation and charactrzation of styrene butadiene rubber based nanocomposites and study of their mechanical properties. Advanced Engineering Materials, 6(9), 738 (2004).

336.

A. K. Naskar, A. K. Bhowmick and S.K. De

Synthesis and characterization of novel dendritic (arborescent, hyperbranched) polyisobutylene-polystyrene block copolymers. J. Polym. Sci., Part A: Polymer Chemistry, 43(9), 1811 (2005).

337.

A. K. Naskar, A. K. Bhowmick and S.K. De

Yeast as coupling agent for corn filler in tyre treat compound, Progress in Rubber. Plastics and Recycling Technology, 21(3), 231 (2005).

338.

A. K. Naskar, D. P. Gala, S. K. De and A. K. Bhowmick

Effect of microstructure of acrylic copolymer/terpolymer on the properties of silica based nanocomposites prepared by sol-gel technique. Polymer, 46(19), 8079 (2005).

339.

B. Kumar, P.P. De, S.K. De, D.G. Peiffer and A. K. Bhowmick

Polymer-filler interactions in sol-gel derived polymer/silica hybrid nanocomposites. J. Polym. Sci., Part B: Polymer Physics, 43(17), 2399 (2005).

340.

B. Kumar, P.P. De, S.K. De, D. G. Peiffer and A. K. Bhowmick

Poly(vinyl alcohol)/silica hybrid nanocomlposites by sol-gel technique : Synthesis and properties. J. Mat. Sci., 40(19), 5233 (2005).

341.

B. Kumar, P.P. De, S.K. De, D.G. Peiffer, S. Majumdar and A. K. Bhowmick

Dynamic mechanical analysis of electron beam irradiated sulphur vulcanized nitrile rubber network-some unique features. J.Mat. Sci.,40(11), 2823 (2005).

342.

B. Kumar, P.P. De, S.K. De, D. G. Peiffer and A. K. Bhowmick

Effect of nanoclay on the dynamic mechanical properties of styrene butadiene and acrylonitrile butadiene rubber vulcanizates. Rubber Chemistry and Technology, 321, 78  (2005).

343.

R.S. Rajeev, S. K. De, A. K. Bhowmick, G.J.P. Kao and
S. Bandyopadhyay

Morphology study of rubber based nanocomposites by transmission electron microscopy and atomic force microscopy. Journal of Materials Science, 1633, 40  (2005).

344.

R.S. Rajeev, A. K. Bhowmick, S.K. De, G.J.P. Kao and S. Bandyopadhyay

Comparative studies on rubber biodegradation through solid-state and submerged fermentation. Process Biochemistry, 41(1), 181 (2006).

345.

R. S. Rajeev, S. K. De and A. K. Bhowmick

Structure and properties of some novel fluoroelastomer/clay nanocomposites with special reference to their interaction. J. Polym. Sci., Part B: Polymer Physics, 44(1), 162 (2005).

346.

A. Bandyopadhyay, M. De Sarkar and A.K. Bhowmick

Rheological bahaviour of hybrid rubber nanocomposites. Rubber Chem. Technol., 78(5), 806 (2005).

347.

J.D. Patel, M. Maiti, K. Naskar and A.K. Bhowmick

Novel styrene thermoplastic elastomers from blends with special reference to compatibilization and dynamic vulcanization. Rubber Chem. Technol., 78(5), 893 (2005).

348.

S. Patel, A. Bandyopadhyay, V. Vijayabaskar and A.K. Bhowmick

Effect of acrylic copolymer and tarpolymer composition on the properties of in-situ polymer/silica hybrid nanocomposites. J. Mat. Sci., 41(3), 927 (2006).

349.

A. Ganguly, M. De Sarkar, and A. K. Bhowmick   

Thermoplastic elastomeric nanocomposites from poly[styrene-(ethylene-co-butylene)-styrene] triblock copolymer and clay: preparation and characterization. J.Appl. Polym. Sci.,100,2040 (2006).

350.

R. Sengupta, S. Sabharwal, T. K Chaki and A.K. Bhowmick

Thermogravimetric studies on Polyamide-6,6 modified by electron beam irradiation and by nanofillers. Polymer Degradation and Stability   91, 1311 (2006). 

351.

S. Patel, A. Bandyopadhyay, A. Ganguly and A. K. Bhowmick

Synthesis and properties of nanocomposite adhesive. Journal of Adhesion Sci. Tech., 20(4), 371 (2006).

352.

H. Acharya, S.K. Srivastava and A. K. Bhowmick

Ethylene propylene diene terpolymer/ethylene vinyl acetate/layered silicate ternary nanocomposite by solution method. Polymer Engineering and Science, 46, 837 (2006).

353.

A.K. Bhowmick and V. Vijayabaskar

Electron beam curing of elastomer. Rubber Chem. Technol., 79, 522 (2006).

354.

M. Maiti and A. K. Bhowmick

New insights into rubber-clay nanocomposites by AFM imaging. Polymer, 47, 6156 (2006).

355.

M. Maiti, J. Patel, K. Naskar and A. K. Bhowmick

Influence of various crosslinking systems on the mechanical properties of gas phase EPDM/PP thermoplastic vulcanizates.  Journal of Applied Polymer Science,  5463, 102  (2006)

356.

A. Bandyopadhyay and A.K. Bhowmick   

Low and high temperature degradation of polymer/in situ silica hybrid nanocomposites.Plastics, Rubber and Composites, 210, 35 (2006).

357.

A. K. Bhowmick, A. Ganguly and M. Maiti

Factors influencing the morphology and the properties of clay-rubber nanocomposites. Kautschuk Gummi Kunststoffe, 437, 59 (2006).

358.

S. L. Agrawal, S. K.  Mandot, N. Mandal, S. Bandyopadhyay, R. Mukhopadhyay, A. S. Deuri, R. Mallik and A.K. Bhowmick 

Effect of corn powder as filler in radial passenger tyre tread compound,   Journal of Materials Science, 5657, 41 (2006).

359.

A. Bandyopadhyay, M. Maiti and A.K. Bhowmick   

Synthesis, characterisation and properties of clay and silica based rubber nanocomposites. Materials Science and Technology, 818, 22 (2006).

360.

J. Patel, M. Maiti, K. Naskar, and A. K. Bhowmick

Nanocomposites based on thermoplastic elastomeric blends of styrene acrylonitrile and ethylene vinyl acetate: effect of nature and loading of nanoclays and dynamic vulcanization,    Polymers & Polymer Composites, 515, 14 (2006).

361.

M. Maiti, and A. K. Bhowmick

Effect of solution concentration on the properties of nanocomposites, Journal of Applied Polymer Science, 2407, 101 (2006).

362.

M. Maiti, S. Sadhu, and A.K. Bhowmick

Ethylene-octene copolymer (engage)-clay nanocomposites: preparation and characterization, Journal of Applied Polymer Science, 603, 101 (2006).

363.

A. Ganguly, M. De Sarkar, A.K. Bhowmick   

Morphological mapping and analysis of poly[styrene-(ethylene-co-butylene)-styrene] and its clay nanocomposites by atomic force microscopy. J. Polym. Sci., Part B : Polymer Physics, 45(1), 52 (2007).

364.

H. Datta, A. K. Bhowmick and N. K. Singha

Atom Transfer Radical Polymerisation of Ethyl Acrylate : Its Mechanistic Studies. Macrmolecular symposia 240, 245 (2006).

365.

J.Jacob George, A. Bandyopadhyay and A. K. Bhowmick   

New generation layered nanocomposites derived from ethylene-co-vinyl acetate and naturally occurring graphite. Journal of Applied Polymer Science, 108(3), 1603 (2008).

366.

S. Sahoo and A. K. Bhowmick   

Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber.Journal of Applied Polymer Science,  106(5), 3077 (2007)

367.

S. Sahoo, M. Maiti, A. Ganguly, J. J. George and A. K. Bhowmick

Effect of ZnO nanoparticles as cure activator on the properties of natural rubber and nitrile rubber. Journal of Applied Polymer Science, 105(4), 2407 (2007).

368.

M. Maiti and A. K. Bhowmick

Effect of Polymer-Clay Interaction on Solvent Transport Behavior of Fluoroelastomer-Clay Nanocomposites and Prediction of Aspect Ratio of Nanoclay. Journal of Applied Polymer Science, 105(2), 435 (2007).

369.

H.Datta, A. K. Bhowmick and N. K. Singha

Tailormade Poly (Ethyl Acrylate) by Atom Transfer Radical Polymerisation. J. Polym. Sci.: Part A: Polym. Chem., 45(9), 1661 (2007).

370.

H. Acharya, Pramanik, M. S.K. Srivastava and A. K. Bhowmick

Synthesis and evaluation of high-performance ethylene-propylene-diene terpolymer/organoclay. Journal of Applied Polymer Science, 93(5), 2429 (2004).

371.

S, Gupta, R.Krishnamurthy, A.Biswas and A. K. Bhowmick

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers. Journal of Applied Polymer Science, 106(6), 3743 (2007).

372.

M. Maiti and A. K. Bhowmick

Dynamic viscoelastic properties of fluoroelastomer/clay nanocomposites, Polymer Engineering and Science, 47(11),1777 (2007).

373.

M. Maiti and A. K. Bhowmick

New fluoroelastomer nanocomposites from synthetic montmorillonite, Composites Science and Technology, 68(1), 1 (2008).

374.

H. Acharya, S.K. Srivastava and A. K. Bhowmick

Synthesis of partially exfoliated EPDM/LDH nanocomposites by solution intercalation: Structural characterization and properties. Composites Science and Technology, 67(13), 2807 (2007).

375.

A. Biswas, A. Bandyopadhyay, N.K. Singha and A. K. Bhowmick

Chemical modification of metallocene-based polyethylene-octene elastomer through solution grafting of acrylic acid and its effect on the physico-mechanical properties. Journal of Applied Polymer Science, 105(6), 3409 (2007).

376.

T. Kuila, H. Acharya, S.K. Srivastava and A. K. Bhowmick

Synthesis and characterization of ethylene vinyl acetate/Mg-Al layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 104(3), 1845 (2007).

377.

A. Bandyopadhyay and A. K. Bhowmick

Factors influencing the structure and properties of nanocomposites derived by sol-gel technique. Journal of Polymer Engineering, 25(8-9), 821 (2006).

378.

S. Patel, A. Bandyopadhyay, V. Vijayabaskar and A. K. Bhowmick

Preparation and properties of new in-situ acrylic copolymer/terpolymer-clay hybrid nanocomposites. Rubber Chemistry and Technology, 79(5), 820 (2006).

379.

R. Sengupta, A. Ganguly, S. Sabharwal, T. K.Chaki and A. K. Bhowmick

MWCNT reinforced polyamide-6,6 films : preparation, characterization and properties. Journal of Materials Science, 42(3), 923 (2007).

380.

H. Acharya, S.K. Srivastava and A. K. Bhowmick

A solution blending route to ethylene propylene diene terpolymer/layered double hydroxide nanocomposites. Nanoscale Research Ltters, 2(1), 1 (2007).

381.

R. Vinod Roy, M. Das, R. Banerjee and A. K. Bhowmick

Comparative studies on crosslinked and uncrosslinked natural rubber biodegradation by Pseudomonas sp.. Bioresource Technology, 97(18), 2485 (2006).

382.

V. Vijayabaskar, R. Gupta, P.P. Chakrabarti and A. K. Bhowmick,

Prediction of properties of ruber by using artificial neural networks. Journal of Applied Polymer Science, 100(3), 2227 (2006).

383.

S. Mitra, S. Chattopadhyay and A. K. Bhowmick

Effect of quasi-nanogel particles on the rheological and mechanical properties of natural rubber. A new insight. Journal of Applied Polymer Science, 107(5), 2755 (2008).

384.

S. Sahoo and A. K. Bhowmick

Polyhedral oligomeric silsesquioxane (POSS) nanoparticles as new crosslinking agent for functionalized rubber. Rubber Chemistry and Technology, 80(5), 826 (2007).

385.

M. Maiti, S. Mitra and A. K. Bhowmick

Effect of nanoclay on high and low temperature degradation of fluroelastomer. Polymer Degradation and Stability, 93(1), 180 (2008).

386.

S. Gupta, R. Krishnamurthy, P.Nisha, A. Biswas and A. K. Bhowmick.

Development and properties of novel thermoplastic elastomer based on poly (phenylene ether). Rubber Chemistry and Technology, 80(4), 642 (2007).

387.

A. Biswas, A. Bandyopadhyay, N. K. Singha and A. K.Bhowmick

Chemical modification of metallocene-based polyolefinic elastomers by acrylic acid and its influence on physico-mechanical properties: effect of reaction parameters, crystallinity and pendant chain length. Journal of Polymer Science, Part A: Polymer Chemistry, 105(6), 3409 (2007).

388.

J. Jacob George and A. K. Bhowmick   

Ethylene vinyl acetate/ expanded graphaite nanocomposites by solution intercalation: preparation characterization and properties. Journal of Materials Science, 43(2), 702 (2008).

389.

H. Datta, N. K. Singha and A. K. Bhowmick

Beneficial Effect of Nanoclay in Atom Transfer Radical Polymerization of Ethyl Acrylate: A One pot preparation of tailor made polymer nanocomposite. Macromolecules, 41(1), 50 (2008).

390.

J. Jacob George, R.Sengupta and A.K.Bhowmick,

Influence of functionalization of multi walled carbon nanotubes on the properties of ethylene vinyl acetate nanocomposites. Journal of Nanoscience and Nanotechnology, 8 (4), 1913 (2008).

391.

S. Mitra, S.Chattopadhyay, Y. K. Bharadwaj, S. Sabharwal and A. K. Bhowmick,

Effect of electron beam cross-linked gels on the rheological properties of raw natural rubber.Radiation Physics and Chemistry, 77 (5), 630 (2008).

392.

A. Ganguly and A. K. Bhowmick

Quantification of Surface Forces of Thermoplastic
Elastomeric Nanocomposites Based on Poly(styreneethylene- co-butylene-styrene) and Clay by Atomic Force Microscopy. Journal of Applied Polymer Science 111 (4), 2105 (2008).

393.

A. Ganguly and A. K. Bhowmick

Sulphonated styrene(ethylene-co-butylene)styrene/ montmorillonite clay nanocomposites: Synthesis, Morphology and Properties. Nanoscale Research Letters, 3 (1), 36 (2008).

394.

J. Jacob George, R.Sengupta and A.K.Bhowmick,

Influence of functionalization of multi walled carbon nanotubes on the properties of ethylene vinyl acetate nanocomposites. Journal of Nanoscience and Nanotechnology, 8 (4), 1913 (2008).

395.

S. Gupta, A. Shom, M.B. Pallavi, R. Krishnamurthy and A. K. Bhowmick.

Anomalous Mechanical Behavior upon Recycling of Poly (phenylene-ether) based Thermoplastic Elastomer. Polymer Engineering and Sciences 48 (3), 496( 2007).

396.

S. Gupta, R. Kamalakaran, A. Maldikar, A. Menon and A. K. Bhowmick

Heat aging behavior of a novel poly (phenylene-ether) based thermoplastic elastomer. Rubber Chemistry and Technology, 81, 244 (2008).

397.

S. Gupta, T. Chandra, A. Sikder, A. Menon and A. K. Bhowmick.

Influence of functionalization of multi walled carbon nanotubes on the properties of ethylene vinyl acetate nanocomposites. Journal of Nanoscience and Nanotechnology, 8 (4), 1913 (2008).

398.

S. Gupta, P. Maiti, K. Krishnamoorthy, R. Krishnamurthy, A. Menon and A. K. Bhowmick.

Effect of silica nanoparticle on reinforcement of poly(phenylene ether)  based Thermoplastic Elastomer. Journal of Nanoscience and Nanotechnology, 8(4), 2114 (2008).

399.

M.Maiti, M.Bhattacharya and A.K.Bhowmick

Elastomer Nanocomposites. Rubber Chemistry and Technology, 81 (3), 384 (2008).

400.

M.Bhattacharya, M.Maiti and A.K.Bhowmick.

Influence of Different Nanofillers and Their Dispersion Methods on Properties of Natural Rubber Nanocomposites. Rubber Chemistry and Technology, ACS (USA), 81 (5), 782 (2008).

401.

M.Bhattacharya, M.Maiti and A.K.Bhowmick

Tailoring Styrene Butadiene Rubber Nanocomposite Properties by Various Nanofillers and their Dispersion. Polymer Engineering and Science, 49 (1), 81 (2009).

402.

K. D. Kumar, S. Gupta, B. B. Sharma, A. H. Tsou and A. K. Bhowmick.

Compatibility and viscoelastic behaviour of brominated isobutylene-co-pmethylstyrene (BIMS) rubber/ tackifier blend. Journal of Applied Polymer Science, 110(3), 1485 (2008).

403.

K. D. Kumar, S. Gupta, B. B. Sharma, A. H. Tsou and A. K. Bhowmick

Probing the viscoelastic properties of brominated isobutylene-co-p-methylstyrene (BIMS) rubber/tackifier blends through rubber process analyzer (RPA). Polymer Engineering and Science, 48 (12),  2400(2008).

404.

K. D. Kumar, A. H. Tsou and A. K. Bhowmick

Unique behavior of hydrocarbon resin tackifier on unaged and aged tack of brominated isobutylene-co-p-methylstyrene (BIMS) rubber. Journal of Adhesion Science and Technology, 22, 2039 (2008).

405.

K. D. Kumar, A.  H. Tsou and A. K. Bhowmick

Influence of Aging on Autohesive Tack of Brominated Isobutylene-co-p-methylstyrene (BIMS) Rubber in the Presence of Phenolic Resin Tackifier. Journal of Adhesion, 84(9), 764 (2008).

406.

M.Bhattacharya and A.K.Bhowmick.

Effect of liquid additives on morphology and properties of thermoplastic elastomers prepared from phase-modified EPDM elastomer and isotactic polypropylene blends. Journal of Materials Science 43 (18), 6167 (2008).

407.

P. Chakraborty, A. Ganguly, S. Mitra and A.K. Bhowmick.

Effect of liquid additives on morphology and properties of thermoplastic elastomers prepared from phase-modified EPDM elastomer and isotactic polypropylene blends. Journal of Materials Science 43 (18), 6167 (2008).

408.

A. Ganguly, S. Saha, A.K. Bhowmick and S. Chattopadhyay.

Augmenting the performance of acrylonitrile-butadiene-styrene plastics for low-noise dynamic applications. Journal of Applied Polymer Science, 109 (3), 1467 (2008).

409.

A. Ganguly, M. Maiti and A.K. Bhowmick.

Structure-property relationship of specialty elastomerclay nanocomposites. Bulletin of Materials Science, 31 (3), 455 (2008).

410.

S. Sahoo, S. Kar, A. Ganguly, M. Maiti and A.K. Bhowmick

Synthetic zinc oxide nanoparticles as curing agent for polychloroprene. Polymers and Polymer Composites, 16 (3), 193 (2008)

411.

P. Chakraborty, A. Ganguly, S. Mitra and A.K. Bhowmick.

Influence of phase modifiers on morphology and properties of thermoplastic elastomers prepared from ethylene propylene diene rubber and isotactic polypropylene. Polymer Engineering and Science, 48 (3), 477 (2008).

412.

S. Pradhan, F. R. Costa, U. Wagenknecht, D. Jehnichen, A. K. Bhowmick and G. Heinrich.   

Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, mechanical properties and interfacial adhesion.  European Polymer Journal, 44(10), 3122 (2008).      

413.

S. Sadhu, R.S. Dey and A. K. Bhowmick  

Thermal degradation of elastomer based nanocomposites.Polymers & Polymer Composites, 16(5), 283 (2008).

414.

H. Datta, A. K. Bhowmick and N. K. Singha  

Tailor-made hybrid nanostructure of poly(ethyl acrylate)/clay by surface-initiated atom transfer radical polymerization. Journal of Polymer Science, Part A: Polymer Chemistry, 46 (15),  5014 (2008), 

415.

M. Maiti and A. K.Bhowmick

Synthesis and properties of new fluoroelastomer nanocomposites from tailored anionic layered magnesium silicates (hectorite). Journal of Applied Polymer Science, 111(2), 1094 (2009). 

416.

T. Kuila, S. Srivastava and A. K. Bhowmick

Rubber/LDH nanocomposites by solution blending.Journal of Applied Polymer Science, 111(2), 635 (2009).

417.

T. Kuila, S. Srivastava and A. K. Bhowmick

Thermoplastic polyolefin based polymer – blend-layered double hydroxide nanocomposites. Composites Science and Technology 68(15-16), 3234 (2008).

418.

A. Biswas, A. Bandyopadhyay, N. K. Singha and A. K.Bhowmick

Sulfonation of Metallocene-Based Polyolefinic Elastomers
and Its Influence on Physicomechanical Properties:
Effect of Reaction Parameters, Styrene Grafting, and Pendant Chain Length. Journal of Polymer Science: Part A: Polymer Chemistry, 46, 8023 (2008).

419.

A. Choudhury, C. Ong and A. K. Bhowmick

Novel role of polymer–solvent and clay–solvent interaction parameters on the thermal, mechanical and optical properties of polymer nanocomposites. Polymer, 50, 201 (2009).

420.

P. K. Maji, P. K. Guchhait, and A. K. Bhowmick

Effect of the Microstructure of a Hyperbranched Polymer and Nanoclay Loading on the Morphology and Properties of Novel Polyurethane Nanocomposites. ACS Applied Material and interfaces, 1, 289 (2009).

421.

P. K. Maji, P. K. Guchhait, and A. K. Bhowmick

Influence of number of functional groups of hyperbranched polyol on cure kinetics and physical properties of polyurethanes.Journal of Polymer Science, Part A: Polymer Chemistry, 47 (3), 731 (2009).

422.

S.Tembhekar, M.Maiti, J.J.George, A.Biswas and A.K.Bhowmick

Low hardness and high strength thermoplastic elastomers from ethylene-butene copolymers and low density polyethylene. Rubber Chemistry and Technology, 81, 60 (2008).

423.

J.J.George and A.K.Bhowmick

Fabrication and properties of ethylene vinyl acetate- carbon nanofiber nanocomposites Nanoscale Research Letters, NANOEXPRESS 3, 508 (2008).

424.

J.J.George, S.Bhadra and A.K.Bhowmick

Influence of carbon-based nanofillers electrical and dielectric properties of ethylene vinyl acetate nanocomposites. Polymer Composites, 31, 218 (2010).

425.

J.J.George and A.K.Bhowmick

Influence of matrix polarity on the properties of ethylene vinyl acetate-carbon nanofiller nanocomposites. Nanoscale Research Letters, NANOEXPRESS, 4, 655 (2009).

426.

S. Mitra, S.Chattopadhyay and A. K. Bhowmick

Influence of Nanogels on Mechanical, Dynamic Mechanical, and Thermal Properties of Elastomers. Nanoscale Res Lett 4, 420 (2009).

427.

S. Mitra, S.Chattopadhyay and A. K. Bhowmick

Synthesis and characterization of chemically crosslinked styrene-butadiene rubber nanogels and their effect on various properties of the rubber. Rubber Chemistry and Technology, 81, 842 (2008).

428.

T. Kuila, H. Acharya, S. K. Srivastava and A. K. Bhowmick

Ethylene vinyl acetate/Mg-Al LDH nanocomposites by solution blending. Polymer Composites, 30, 497 (2009).

429.

T. Kuila, H. Acharya, S. K. Srivastava and A. K. Bhowmick

Effect of vinyl acetate content on the mechanical and thermal properties of ethylene vinyl acetate/MgAl layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 108, 1329 (2008).

430.

H. Acharya, T. Kuila, S. K. Srivastava and A. K Bhowmick

Effect of layered silicate on EPDM/EVA blend nanocomposite: Dynamic mechanical, thermal, and swelling properties.Polymer Composites, 29, 443 (2008).

431.

S. Mitra, S. Chattopadhyay, S. Sabharwal and A. K. Bhowmick

Rheological Behavior of Gel-Filled Raw Natural Rubber and Styrene-Butadiene Rubber with Reference to Gel-Matrix Intermixing. Polymer Engineering and Science Polymer Engineering & Science, 49(6), 1050 (2009).

432.

G.C.Basak, A.Bandyopadhyay,Y. K. Bharadwaj, S. Sabharwal and A.K. Bhowmick.

Adhesion of vulcanized rubber surfaces: Characterization of unmodified and electron beam modified EPDM surfaces and their Co-vulcanization with natural rubber. Journal of Adhesion Science and Technology, 23 (13-14), 1763 (2009).

433.

H. Datta, A. K. Bhowmick and N. K. Singha.

Methacrylate/acrylate ABA triblock copolymers by atom transfer radical polymerization; their properties and application as a mediator for organically dispersible gold nanoparticles. Polymer 50 (14), 3259 (2009).     

434.

J. J. George and A. K.Bhowmick,

Influence of matrix polarity on the properties of ethylene vinyl acetate-carbon nanofiller nanocomposites, Nanoscale Research Letters, 4(7), 655 (2009).

435.

S. Kar and A. K. Bhowmick

Nanostructured magnesium oxide as cure activator for polychloroprene rubber. Journal of Nanoscience and Nanotechnology, 9 (5), 3144 (2009).

436.

A. Biswas, A. Bandyopadhyay, N. K. Singha and A. K.Bhowmick

Ionomeric modification of metallocene-based polyolefinic elastomers with varied pendant chain length and its influence on physico-mechanical properties. Journal of Materials Science, 44(12), 3125 (2009).

437.

P. K. Maji , P.K. Guchhait and A. K. Bhowmick

Effect of nanoclays on physico-mechanical properties and adhesion of polyester-based polyurethane nanocomposites: structure-property correlations. Journal of Materials Science, 44, 5861 (2009).

438.

M. Kotal,  T. Kuila,  S. Srivastava and A. K. Bhowmick

Synthesis and characterization of polyurethane/mg-al layered double hydroxide nanocomposites. Journal of Applied Polymer Science, 114 (5), 2691 (2009).

439.

S.Kar,P.K. Maji and  A.K. Bhowmick

Chlorinated polyethylene nanocomposites: thermal and mechanical behaviour. Journal of Materials Science, 45 (1), 64 (2010).

440.

A. Biswas, A.Bandyopadhyay, N.K. Singha andA.K.  Bhowmick

Ionomeric modification of a metallocene-based polyolefinic elastomer and its influence on the physicomechanical properties: Effects of the crystallinity and pendent chain length.  Journal of Applied Polymer Science, 114 (6), 3906 (2009).

441.

Z. Ahmad, K.D. Kumar,  M. Saroop,  N. Preschilla,  A. Biswas,  J.R.Bellare and A. K.Bhowmick

Highly transparent thermoplastic elastomer from isotactic polypropylene and styrene/ethylene-butylene/styrene triblock copolymer: Structure-property correlations.  Polymer Engineering and Science, 50 (2),  331(2010).

442.

A. Biswas, N. K. Singha and A. K.Bhowmick

Effect of polar modifications on cure characteristics, solvent resistance and thermo-mechanical properties of metallocene-based polyolefinic elastomers. European Polymer Journal, 46 (2), 364 (2010).

443.

S. Mitra, S. Chattopadhyay, S. Sabharwal and A. K. Bhowmick

Electron beam crosslinked gels-Preparation, characterization and their effect on the mechanical, dynamic mechanical and rheological properties of rubbers. Radiation Physics and Chemistry, 79 (3), 289 (2010). 

444.

P. K. Maji, N.K. Das and A. K. Bhowmick

Preparation and properties of polyurethane nanocomposites of novel architecture as advanced barrier materials. Polymer 51 (5), 1100 (2010).

445.

 S. Rooj,A. Das,V.Thakur, R.N.Mahaling, A.K.Bhowmick and G.Heinrich

Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes. Materials and Design, 31 (4), 2151 (2010).

446.

A. Choudhury, C. Ong and A. K. Bhowmick

Effect of different nanoparticles on thermal, mechanical and dynamic mechanical properties of hydrogenated nitrile butadiene rubber nanocomposites. Journal of Applied Polymer Science, 116 (3), 1428 (2010).

447.

 G.C. Basak, A.Bandyopadhyay, Y.K.Bharadwaj, S.Sabharwal and A.K. Bhowmick

Characterization of EPDM vulcanizates modified with gamma irradiation and trichloroisocyanuric acid and their adhesion behavior with natural rubber. Journal of Adhesion 86 (3), 306 (2010).

448.

K.D. Kumar, A.H. Tsou and A.K. Bhowmick

Facile one-pot synthesis and characterization of maleated hydrocarbon resin tackifier for improved adhesion. Int. J. Adhesion and Adhesives, 30, 200 (2010).

449.

K.D. Kumar, A.H. Tsou and A.K. Bhowmick

Interplay between bulk viscoelasticity and surface energy in autohesive tack of rubber-tackifier blends. J. Polym. Sci. –Physics, 48, 972 (2010).

450.

K.D. Kumar, A.H. Tsou and A.K. Bhowmick

Unique tackification behavior of sepiolite nanoclay in brominated isobutylene-co-p-methylstyrene (BIMS) rubber. Macromolecules, 43, 4184 (2010).

451.

 M.Bhattacharya, A.K. Bhowmick

Analysis of wear characteristics of natural rubber nanocomposites.WEAR, 269, 152 (2010).

452.

A. Bandyopadhyay, V. Thakur, S. Pradhan and  A. K.Bhowmick

Nanoclay distribution and its influence on the mechanical properties of rubber blends, Journal of Applied Polymer Science, 115, 1237 (2010).

453.

M. Kotal, S.K. Srivastava,  A. K. Bhowmick

Thermoplastic polyurethane and nitrile butadiene rubber blends with layered double hydroxide nanocomposites by solution blending. Polymer Iternational, 59, 2 (2010).

454.

J. J. George, S. Bhadra and A.K. Bhowmick

Influence of carbon-based nanofillers on the electrical and dielectric properties of ethylene vinyl acetate nanocomposites. Polymer Composites, 31, 218 (2010).

455.

M. Ray, J. J. George, A. Chakraborty and A.K. Bhowmick

An investigation of the electromagnetic shielding effectiveness of ethylene vinyl acetate elastomer reinforced with carbon nanofillers.  Polymers & Polymer Composites, 18, 59 (2010). 

456.

P. K. Guchhait, S. Pradhan,  K. D. Kumar, P. Maji and A.K. Bhowmick

Influence of nanoclay on the morphology, adhesive and mechanical properties of polysulfide modified epoxy resin. Polymers & Polymer Composites, 18, 123 (2010).

457.

M. Bhattacharya and A. K. Bhowmick

Synergy in carbon black-filled natural rubber nanocomposites. Part I: Mechanical, dynamic mechanical properties, and morphology, 45, 6126 (2010).

458.

M. Bhattacharya and A. K. Bhowmick

Synergy in carbon black filled natural rubber nanocomposites. Part II: Abrasion and viscoelasticity in tire like applications, 45, 6139 (2010).

459.

A. Choudhury, A. K. Bhowmick, C. Ong and M. Soddemann

Influence of molecular parameters on thermal, mechanical, and dynamic mechanical properties of hydrogenated nitrile rubber and its nanocomposites. Polymer Engineering & Science, 50, 1389 (2010).

460.

G. C. Basak, A. Bandyopadhyay and A.K. Bhowmick

Effect of tackifier compatibility and blend viscoelasticity on peel strength behavior of vulcanized EPDM rubber co-cured with unvulcanized rubber. International Journal of Adhesion and Adhesives, 30, 489 (2010).

461.

S. Mitra, S. Chattopadhyay and A.K. Bhowmick

Preparation and characterization of elastomer-based nanocomposite gels using anunique latex blending technique. Journal of Applied Polymer Science, 81, 118 (2010).

462.

V. Thakur, A. Leuteritz, U. Gohs, B. Kretzschmar, U. Wagenknecht, A.K. Bhowmick and G. Heinrich

Montmorillonite nanocomposites with electron-beam modified atactic polypropylene. Applied Clay Science, 49, 200 (2010).

463.

M. Bhattacharya and A. K. Bhowmick

Correlation of vulcanization and viscoelastic properties of nanocomposites based on natural rubber and different nanofillers, with molecular and supramolecular structure. Rubber Chemistry and Technology, 83, 16, (2010)

464.

A. K. Bhowmick, M.Bhattacharya,S.Mitra, P. K. Maji, A. Choudhury, J.J. George, G. C. Basak and K.D. Kumar

Rubber based nanocomposites. Kautschuk Gummi Kunststoffe, 63, 192 (2010).

465.

G. C. Basak,K.D. Kumar, A. Bandyopadhyay and Anil K.Bhowmick

Elegant Way of Strengthening Polymer-Polymer Interface Using Nanoclay. ACS Applied Materials & Interfaces, 2, 2933 (2010).

466.

A. Choudhury, A. K. Bhowmick, C. Ong and M. Soddemann

Effect of various nanofillers on thermal stability and degradation kinetics of polymer nanocomposites. Journal of Nanoscience and Nanotechnology, 10, 5056 (2010).

467.

A. K. Bhowmick, M. Bhattacharya and S. Mitra

Exfoliation of Nanolayer Assemblies for Improved Natural Rubber Properties: Methods and Theory. Journal of Elastomers and Plastics, 42, 517 (2010).

468.

N. Roy and Anil K. Bhowmick

Novel in situ polydimethylsiloxane-sepiolite nanocomposites: Structure-property relationship. Polymer 51, 5172 (2010).

469.

A. Choudhury, A. K. Bhowmick and M. Soddemann

Effect of organo-modified clay on accelerated aging resistance of hydrogenated nitrile rubber nanocomposites and their life time prediction. Polymer Degradation and Stability, 95, 2555 (2010).

470.

G. Rajesh, P. Maji, M. Bhattacharya, A. Choudhury and A. K. Bhowmick

Liquid Silicone Rubber Vulcanizates: Crosslinking by Polymethylhydrogenosiloxane, Cure Kinetics and Structure – Property Relationship. Polymers and Polymer Composites, 18, 477 (2010).

 

Publication Year: 2011 – Till Date Top

471.

A. K. Bhowmick, M. Bhattacharya, S. Mitra, K. Dinesh Kumar, P. K. Maji, A. Choudhury, J. J. George and G. C.Basak

Morphology – Property Relationship in Rubber Based Nanocomposites: Some Recent Developments. Advances in Polymer Science, 239, 1 (2011).

472.

G. C. Basak, A. Bandyopadhyay, S. Neogi and A. K. Bhowmick

Surface modification of argon/oxygen plasma treated vulcanized ethylene propylene diene polymethylene surfaces for improved adhesion with natural rubber. Applied Surface Science, 257, 2891 (2011).

473

V. Chaudhary, A. K. Thakur and A. K. Bhowmick

Improved optical and electrical response in metal–polymer nanocomposites for photovoltaic applications. J. Mater Sci, 46, 6096 (2011).

474.

M. Bhattacharya, S. Biswas and A. K. Bhowmick

Permeation characteristics and modeling of barrier properties of multifunctional rubber nanocomposites. Polymer, 52, 1562 (2011).

475.

G. C. Basak, A. Bandyopadhyay and A. K. Bhowmick

Influence of nanoclay on adhesion of EPDM vulcanizate. International Journal of Adhesion & Adhesives, 31, 209 (2011).

476.

R. Sengupta, M. Bhattacharya, S. Bandyopadhyay and A. K. Bhowmick

A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites. Progress in Polymer Science, 36, 638 (2011).

477.

S Mitra, S. Chattopadhyay and A. K. Bhowmick

Dynamic stress relaxation behavior of nanogel filled elastomers. J. Polym Res, 18, 489 (2011).

478.

S. Rooj, Ganesh C. Basak, P. K. Maji and A. K. Bhowmick

New Route for Devulcanization of Natural Rubber and the Properties of Devulcanized Rubber. J. Polym Environ, 19, 382 (2011).

479.

S. Rooj, V. Thakur, U. Gohs, U. Wagenknecht, A. K Bhowmick and G. Heinrich.

In situ reactive compatibilization of polypropylene/epoxidized natural rubber blends by electron induced reactive processing: novel in-line mixing technology. Polymers for Advanced Technologies, 22(12), 2257 (2011).

480.

S. Gupta, A. Menon and Anil K Bhowmick.

Sustainability in reinforced and unfilled poly(phenylene-ether) based TPEs. Rubber World, 245(1), 30 (2011).

481.

S. Gupta, T. Chandra, A. Menon and A. K. Bhowmick

Thermo and photo oxidative behavior of poly(phenylene ether) based thermoplastic elastomers. Annual Technical Conference – Society of Plastics Engineers, 3(69th), 2585(2011).

482.

S. Gupta, A. Menon and A. K. Bhowmick.

Sustainability in reinforced and unfilled poly (phenylene-ether) based thermoplastic elastomers. Annual Technical Conference – Society of Plastics Engineers, 3(69th), 2578 (2011).

483.

T. Mondal andA. K. Bhowmick

2-Methyl oxazoline-grafted carbon nanofibers: preparation, characterization and their role in elastomeric actuators. J Mater Sci, 47, 4178 (2012).

484.

T. Mondal, A. K. Bhowmick and R. Krishnamoorti

Chlorophenyl pendant decorated graphene sheet as a potential antimicrobial agent: synthesis and characterization. Journal of Material Chemistry, 22, 22481 (2012).

485.

N. Roy and A. K. Bhowmick

Dynamic Transitions and Creep in Carbon Nanofiber/ Polydimethylsiloxane Nanocomposites with Meticulously Architectured Polymer−Filler Interfaces. Industrial & Engg Chemistry Res, 51, 9571 (2012).

486.

N. Roy and A. K. Bhowmick

In situ preparation, morphology and electrical properties of carbon nanofiber/polydimethylsiloxane nanocomposites. J. Mater Sci, 47, 272 (2012).

487.

N. Roy, R. Sengupta and A. K. Bhowmick

Modifications of carbon for polymer composites and nanocomposites. Progress in Polymer Science, 37, 781 (2012).

488.

N. Roy and A. K. Bhowmick

Novel In Situ Carbon Nanofiber/Polydimethylsiloxane Nanocomposites: Synthesis, Morphology, and Physico-Mechanical Properties. Journal of Appl Polym Sci., 123, 3675 (2012).

489.

N. Roy and A. K. Bhowmick

Novel in situ silica/polydimethylsiloxane nanocomposites: facile one pot synthesis and characterisation. Rubber Chemistry and Technology, 85(1), 92 (2012).

490.

N. Roy and A. K. Bhowmick

Tailor-Made Fibrous Hydroxyapatite/Polydimethylsiloxane Composites: Insight into the Kinetics of Polymerization in the Presence of Filler and Structure−Property Relationship. The Journal of Physical Chemistry C, 116, 26551 (2012).

491.

N. Roy and A. K. Bhowmick

Tailor-Made Fibrous Nanohydroxyapatite/Polydimethylsiloxane Composites: Excavating the Role of Nanofiller Aspect Ratio, Amorphicity, and Noncovalent Surface Interaction. The Journal of Physical Chemistry C, 116, 8763 (2012).

492.

N. Roy and A K. Bhowmick

Polydimethylsiloxane nanocomposites with various organic and inorganic fibrous nanofillers: morphology-property Correlation. Fall Technical Meeting of the Rubber Division, 2, 862(2012).

493.

G. C. Basak, A. Bandyopadhyay and A. K. Bhowmick

The role of tackifiers on the auto-adhesion behavior of EPDM rubber. J. Mater Sci., 47, 3166 (2012).

494.

M. Bhattacharya, S. Biswas, S. Bandyopadhyay and A. K. Bhowmick

Influence of the nanofiller type and content on permeation characteristics of multifunctional NR nanocomposites and their modelling. Polymers for Advanced Technologies, 23(3), 596 (2012).

495.

P. K. Maji and A. K. Bhowmick

Efficacy of clay content and microstructure of curing agents on the structure-property relationship of new-generation polyurethane nanocomposites. Polymers for Advanced Technologies, 23(9), 1311 (2012).

496.

B. Talukdar and A. K. Bhowmick

An Imidazolium-Functionalized Isobutylene Polymer Having Improved Mechanical and Barrier Properties: Synthesis and Characterization. Journal of Applied Polymer Science, 128(5), 2911 (2013).

497.

N. Roy and A. K. Bhowmick

Synthesis and characterization of fibrous nanosilica/polydimethylsiloxane composite. Journal of Applied Polymer Science, 130(2), 1005(2013).

498.

N.Roy, T. Dey, S. C. Kundu and A. K. Bhowmick

Biocompatible composites of fibrous nanohydroxyapatite embedded in a polydimethylsiloxane. J. Mater Sci., 48, 5132 (2013).

499.

N. Kasyapi, V. Chaudhary and A. K. Bhowmick

Bionanowhiskers from jute: Preparation and characterization carbohydrate. Polymers, 92, 1116 (2013).

500.

A. Choudhury,  A. K. Bhowmick and M. Soddemann

Influence of Nanofillers on the Sorption and Diffusion Characteristics of the Solvent in Vulcanized Hydrogenated Nitrile Rubber Nanocomposite. Journal of Applied Polymer Science, 128(4), 2556 (2013).

501.

P. K. Maji and A. K. Bhowmick

Structure–Property Correlation of Polyurethane Nanocomposites:Influence of Loading and Nature of Nanosilica and Microstructure of Hyperbranched Polyol. Journal of Applied Polymer Science, 127(6), 4492 (2013).

502.

T. Mondal, A. K. Bhowmick and R. Krishnamoorti

Synthesis and characterization of bi-functionalized graphene and expanded graphite using n-butyl lithium and their use for efficient water soluble dye adsorption. Journal of Mater. Chem. A, 1, 8144 (2013).

503.

V. Chaudhary and A. K. Bhowmick

Synthesis, optical, and electrical properties of RNA-mediated Ag/PVA nanobiocomposites. J. Nanopart Res, 15, 1508 (2013).

504.

M. Kotal, A. K. Thakur and A. K. Bhowmick

Polyaniline–Carbon Nanofiber Composite by a Chemical Grafting Approach and Its Supercapacitor Application.ACS Appl. Mater. Interfaces, 5(17), 8374 (2013). DOI: 10.1021/am4014049.

505.

S. Anandhan and A. K. Bhowmick

Thermoplastic vulcanizates from post consumer computer plastics /nitrile rubber blends by dynamic vulcanization. Journal of Material Cycles and Waste Management, 15 (3), 300 (2013). 

506

S. S. Banerjee and A. K. Bhowmick

Novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends: Influence of interaction and morphology on physical properties. Polymer, 54 (24), 6561 (2013).

507

T. Mondal,   A. K. Bhowmick and   R. Krishnamoorti  

Butyl lithium assisted direct grafting of polyoligomeric silsesquioxane onto grapheme.RSC Adv., 4, 8649 (2014).

508

M. Kotal and A. K. Bhowmick

Multifunctional Hybrid Materials Based on Carbon Nanotube Chemically Bonded to Reduced Graphene Oxide. J. Phys. Chem. C, 117 (48), 25865 (2013).

509

N. Kasyapi and A. K. Bhowmick

Nanolamellar triblock of poly-D,L-lactide–δ-valerolactone–D,L-lactide with tuneable glass transition temperature and crystallinity for use as a drug-delivery vesicle. RSC Adv., 4, 27439 (2014).

510

T. Mondal,   A. K. Bhowmick and   R. Krishnamoorti

Conducting Instant Adhesives by Grafting of Silane Polymer onto Expanded Graphite. ACS Applied Materials & Interfaces, 6(18), 16097 (2014). 

511

N. Kasyapi and A. K. Bhowmick

Spectroscopic and Morphology Studies of Biodegradable Nanolamellar Lactone Based Triblocks. Journal of Physical Chemistry C, 118(38), 22325 (2014). 

512

T. Mondal,   A. K. Bhowmick and R. Krishnamoorti

Stress Generation and Tailoring of Electronic Properties of Expanded Graphite by Click Chemistry. ACS Applied Materials & Interfaces, 6 (10), 7244 (2014). 

513

R. Mehta, R. Kumari, P. Das, Bhowmick and A. K. Bhowmick

Synthesis and characterization of a biocompatible monotyrosine- based polymer and its interaction with DNA.
Journal of Materials Chemistry B: Materials for Biology and Medicine, 2(37), 6236 (2014).

514

B. Kumari, S. S. Banerjee, V. Singh, P. Das and A. K. Bhowmick

Processing of abasic site damaged lesions by APE1 enzyme on DNA adsorbed over normal and organomodified clay.Chemosphere, 112, 503 (2014). 

515

A. Banerjee, M. Dutta, S. Bysakh, A. K. Bhowmick and T. Laha

A novel coating strategy towards improving interfacial adhesion strength of Cu- Sn alloy coated steel with vulcanized rubber. Applied Surface Science, 313, 804 (2014).

516

P. Sarkar and A. K. Bhowmick 

Synthesis, characterization and properties of a bio-based elastomer: Polymyrcene. RSC Adv., 4, 61343 (2014). 

517

A. Ahmed, P. Sarkar, I. Ahmad, N. Das and A. K. Bhowmick

Influence of the Nature of Acrylates on the Reactivity, Structure, and Properties of Polyurethane Acrylates. Industrial & Engineering Chemistry Research, 54 (1), 47 (2015). 

518

S. S. Banerjee and A. K. Bhowmick

Dynamic vulcanization of novel nanostructured polyamide 6 / fluoroelastomer thermoplastic elastomeric blends with special reference to morphology, physical properties and degree of vulcanization. Polymer, 57, 105 (2015). 

519

A. Banerjee, R. Kumar, M. Dutta, S. Bysakh, A. K. Bhowmick and T. Laha.

Microstructural evolution in Cu- Sn coatings deposited on steel substrate and its effect on interfacial adhesion.Surface and Coatings Technology, 262, 200 (2015).

520

S. S. Banerjee and A. K. Bhowmick.

Experimental study on the CO2 laser cutting of novel polyamide 6 /fluoroelastomer thermoplastic elastomeric blends.
Rubber Chemistry and Technology, 88 (1), 125 (2015). 

521

S. S. Banerjee, K. D. Kumar and A. K.  Bhowmick

Distinct Melt Viscoelastic Properties of Novel Nanostructured and Microstructured Thermoplastic Elastomeric Blends from Polyamide 6 and Fluoroelastomer. Macromolecular Materials and Engineering, 300 (3), 283 (2015).

522

T. Mondal, A. K. Bhowmick and R. Krishnamoorti

Controlled Synthesis of Nitrogen- Doped Graphene from a Heteroatom Polymer and Its Mechanism of Formation.Chemistry of Materials, 27 (3), 716 (2015).

523

N. Kasyapi, R. Mehta and A. K. Bhowmick.

Raman and NMR Spectroscopic Studies on Hydrolytic Degradation of D, L- Lactide- δ- Valerolactone- D, L- Lactide Copolymer. ACS Sus. Chem. & Eng. 3(7), 1381 (2015) 

524 Shib Shankar Banerjee and Anil K. Bhowmick

Tailored Nanostructured Thermoplastic Elastomers from Polypropylene and Fluoroelastomer: Morphology and Functional Properties, ACS Industrial & Engineering Chemistry Research,  54(33), 8137-8146 (2015).

525 M. Kotal and A. K. Bhowmick

Polymer nanocomposites from modified clays: Recent advances and challenges, Progress in Polymer Science 51, 127-187 (2015)

526 Titash Mondal, Anil K Bhowmick, Ramanan Krishnamoorti,

Controlled Synthesis of Nitrogen- Doped Graphene from a Heteroatom Polymer and Its Mechanism of Formation, ACS Chemistry of Materials  27(3), 716-725 (2015)

527 V. Chaudhary and A. K. Bhowmick

Green synthesis of fluorescent carbon nanoparticles from lychee (Litchi chinensis) plant,  Korean J. Chem. Eng., 32(8), 1707-1711 (2015)

528 Rina Kumari; Shib Shankar Banerjee; Anil K Bhowmick; Prolay Das

DNA- melamine hybrid molecules: from self- assembly to nanostructures , Beilstein Journal of Nanotechnology , 6, 1432-1438 (2015).

529 B. Kumari, S. S. Banerjee, V. Singh, P. Das and A. K. Bhowmick Processing of abasic  site damaged lesions by APE1 enzyme on DNA adsorbed over normal and organomodifie dclay. Chemosphere, 112, 503 ( 2015)
530 P. Sarkar, A. K. Bhowmick

Green Approach toward Sustainable Polymer: Synthesis and Characterization of Poly(myrcene- co- dibutyl itaconate) ACS Sus. Chem. & Eng. 4(4), 2129 (2016) 

531 T Mondal, R Ashkar, P Butler, AK Bhowmick, R Krishnamoorti Graphene Nanocomposites with High Molecular Weight Poly (ε-caprolactone) Grafts: Controlled Synthesis and Accelerated Crystallization,  ACS Macro Letters 5 (3), 278-282 (2016)
532 M Kotal, SS Banerjee, AK Bhowmick Functionalized graphene with polymer as unique strategy in tailoring the properties of bromobutyl rubber nanocomposites, Polymer 82, 121-132 (2016)
533

SS Banerjee, AK Bhowmick

An effective strategy to develop nanostructured morphology and enhanced physico-mechanical properties of PP/EPDM thermoplastic elastomers, Journal of Materials Science 51 (14), 6722-6734 ( 2016 )

534

P Sarkar, AK Bhowmick

Terpene Based Sustainable Elastomer for Low Rolling Resistance and Improved Wet Grip Application: Synthesis, Characterization and Properties of Poly (styrene-co-myrcene), ACS Sustainable Chemistry & Engineering 4 (10), 5462-5474( 2016 )
535

MS Satyanarayana, AK Bhowmick, KD Kumar

Preferentially fixing nanoclays in the phases of incompatible carboxylated nitrile rubber (XNBR)-natural rubber (NR) blend using thermodynamic approach and its effect on physico mechanical properties, Polymer 99, 21-43( 2016 )

536

A Banerjee, D Prusty, M Dutta, AK Bhowmick, T Laha

Effect of Cu2O thin film on Cu–Sn alloy coated steel surface in promoting interfacial adhesion with rubber, Journal of Adhesion Science and Technology, 1-18(2016 )

537 S Saha, AK Bhowmick

Computer simulation of thermoplastic elastomers from rubber-plastic blends and comparison with experiments, Polymer 103, 233-242(2016 )

538 HH Le, A Das, S Basak, M Tahir, S Wiessner, D Fischer, U Reuter, A.K. Bhowmick, G. Heinrich

Effect of different ionic liquids on the dispersion and phase selective wetting of carbon nanotubes in rubber blends, Polymer 105, 284-297 ( 2016 )

539 T Saha, AK Bhowmick, T Oda, T Miyauchi, N Fujii

Degradation of polyacrylic elastomers: Theoretical and experimental studies, Polymer Degradation and Stability 134, 60-75 ( 2016 )

540

T Mondal, AK Bhowmick, R Ghosal, R Mukhopadhyay

Graphene-Based Elastomer Nanocomposites: Functionalization Techniques, Morphology, and Physical Properties, Advances in Polymer Science: Designing of Elastomer Nanocomposites: From Theory to Applications, 267-318( 2017 )

541 P Sarkar, AK Bhowmick Sustainable rubbers and rubber additives,  Journal of Applied Polymer Science, DOI: 10.1002/app.45701 (2017)
542 SS Banerjee, AK Bhowmick High-temperature thermoplastic elastomers from rubber–plastic blends: a state-of-the-art review,  Rubber Chemistry and Technology 90 (1), 1-36 ( 2017)
543 S Saha, AK Bhowmick Computer aided simulation of thermoplastic elastomer from poly (vinylidene fluoride)/hydrogenated nitrile rubber blend and its experimental verification,  Polymer 112, 402-413 (2017)
544 T Saha, AK Bhowmick High-temperature pyrolysis simulation of acrylonitrile-butadiene model compound with experimental evidence,  Journal of Analytical and Applied Pyrolysis 125, 243-257 ( 2017)
545 A Banerjee, D Prusty, M Dutta, AK Bhowmick, T Laha Effect of Cu2O thin film on Cu–Sn alloy coated steel surface in promoting interfacial adhesion with rubber,  Journal of Adhesion Science and Technology 31 (11), 1163-1180 ( 2017)
546 P Sarkar, AK Bhowmick Terpene based sustainable methacrylate copolymer series by emulsion polymerization: Synthesis and structure-property relationship,  Journal of Polymer Science Part A: Polymer Chemistry 55 (16), 2639-2649 ( 2017)
547 KD Kumar, GC Basak, AK Bhowmick Adhesion Between Unvulcanized Elastomers: A Critical Review,  Reviews of Adhesion and Adhesives 5 (3), 195-267 ( 2017)
548 T Mondal, S Basak, AK Bhowmick Ionic liquid modification of graphene oxide and its role towards controlling the porosity, and mechanical robustness of polyurethane foam,  Polymer 127, 106-118 ( 2017)
549 N Kasyapi, K Dinesh Kumar, AK Bhowmick Influence of microstructure of lactone‐based triblock copolymers on drug release behavior of their microspheres,  Journal of Applied Polymer Science 134 , 37 ( 2017)
550 A Datta Sarma, HR Padmanathan, S Saha, S Shankar Banerjee, AK Bhowmick Design and properties of a series of high‐temperature thermoplastic elastomeric blends from polyamides and functionalized rubbers Journal of Applied Polymer Science 134 , 39 ( 2017 )
551 P. Sahu, P. Sarkar, A.K. Bhowmick

Synthesis and Characterization of a Terpene-Based Sustainable Polymer:

Poly-alloocimene, ACS Sustainable Chemistry & Engineering, 5, 7659–7669, (2017). 

552 N Kasyapi, K Dinesh Kumar, AK Bhowmick Sustainable bionanocomposite from d, l-lactide/δ-valerolactone triblock and bionanowhiskers: Preparation, characterization, and properties , Journal of Applied Polymer Science 135 (13) ( 2018)
553 Subhabrata Saha, Anil K Bhowmick SMART THERMOPLASTIC ELASTOMERS WITH HIGH EXTENSIBILITY FROM POLY (VINYLIDENE FLUORIDE) AND HYDROGENATED NITRILE RUBBER: PROCESSING–STRUCTURE–PROPERTY RELATIONSHIPRubber Chemistry and Technology:  2018, 91, pp. 268-295.
554 Tuhin Saha, Anil K Bhowmick Influence of nanofiller on thermal degradation resistance of hydrogenated nitrile butadiene rubber, Rubber Chemistry and Technology:  2019, Vol. 92, No. 2, pp. 263-285.
555 Tuhin Saha, Anil K Bhowmick, Takeshi Oda, Toshiaki Miyauchi, Nobuhiko Fujii Reactive molecular dynamics simulation for analysis of thermal decomposition of oligomeric polyacrylicester model nanocomposite and its experimental verificationPolymerVolume 137,  2018, Pages 38-53
556 Preetom Sarkar, Anil K Bhowmick Terpene-Based Sustainable Elastomers: Vulcanization and Reinforcement CharacteristicsInd. Eng. Chem. Res.2018, 57, 15, 5197-5206.
557 Pranabesh Sahu, Preetom Sarkar, Anil K Bhowmick Design of a Molecular Architecture via a Green Route for an Improved Silica Reinforced Nanocomposite using BioresourcesACS Sustainable Chem. Eng.2018, 6, 5, 6599-6611
558 Preetom Sarkar, Anil K Bhowmick

Sustainable rubbers and rubber additivesJournal of Applied Polymer Science, Volume 135, Issue 24, 45701, 2018.                                                                 Special Issue: Recent Advances in Applied Polymer Science 

559 Titash Mondal, Anil K Bhowmick, Ranjan Ghosal, Rabindra Mukhopadhyay Expanded graphite as an agent towards controlling the dispersion of carbon black in poly (styrene-co-butadiene) matrix: An effective strategy towards the development of high-performance multifunctional composite, PolymerVolume 146,  2018, Pages 31-41.
560 K Dinesh Kumar, MS Satyanarayana, Ganesh C Basak, Anil K Bhowmick Adhesion between Compounded Elastomers: A Critical ReviewReviews of Adhesion and Adhesives, 6,  2, 2018, pp. 105-201(97)Scrivener PublishingDOI: https://doi.org/10.7569/RAA.2018.097306
561 K Dinesh Kumar, Ganesh C Basak, Anil K Bhowmick Adhesion Between Unvulcanized Elastomers: A Critical Review, Progress in Adhesion and Adhesives, Volume 3 (185–252) © 2018 Scrivener Publishing LLC
562 AD Sarma, HH Le, A Das, S Wießner, KW Stöckelhuber, AK Bhowmick, G Heinrich Determination of phase-specific localization of carbon black in ternary rubber blends: A macroscopic approach by Fourier transform infrared spectroscopy (FTIR)PolymerVolume 150, 2018, Pages 64-71.
563 Harini Sridharan, Abhilash Guha, Sanjay Bhattacharyya, Anil K Bhowmick, R Mukhopadhyay EFFECT OF SILICA LOADING AND COUPLING AGENT ON WEAR AND FATIGUE PROPERTIES OF A TREAD COMPOUND, Rubber Chemistry and Technology:  2019, Vol. 92, No. 2, pp. 326-349.
564 MS Satyanarayana, PR Sreenath, Anil K Bhowmick, K Dinesh Kumar Selective Orientation of Needlelike Sepiolite Nanoclay in Polymer Blend for Controlled PropertiesACS Omega 2018, 3, 9, 11691-11702
565 Tuhin Saha, Anil K Bhowmick, Takeshi Oda, Toshiaki Miyauchi, Nobuhiko Fujii INFLUENCE OF DIANILINE CROSS-LINKING SYSTEMS ON THE STRUCTURE, CURING MECHANISM, AND PROPERTIES OF POLYACRYLICESTER ELASTOMER, Rubber Chemistry and Technology:  2018, Vol. 91, No. 4, pp. 729-750.
566 MS Satyanarayana, PR Sreenath, Anil K Bhowmick, K Dinesh Kumar Catalyst driven preferential growth of in-situ generated nanosilica particles in the phases of incompatible polymer blend and its effect on physico-mechanical propertiesPolymerVolume 156, 2018, Pages 186-202.
567 Subhabrata Saha, Anil K Bhowmick Microstructure and relaxation behavior of flexible dielectric PVDF and HNBR blends: An assessment through small‐angle x‐ray scattering and dielectric relaxation spectroscopy, Journal of Polymer Science Part B: Polymer Physics, Volume 57, Issue 13, 2019, Pages 851-866
568 Pranabesh Sahu, Anil K Bhowmick Sustainable self‐healing elastomers with thermoreversible network derived from biomass via emulsion polymerization, Journal of Polymer Science Part A: Polymer Chemistry, Volume 57, Issue 6, 2019, Pages 738-751.
569 Subhabrata Saha, Anil K Bhowmick An Insight into molecular structure and properties of flexible amorphous polymers: A molecular dynamics simulation approach, Journal of Applied Polymer Science, Volume 136, Issue 18, 2019, 47457.
570 Sanjay Bhattacharyya, Vivekanda Lodha, Saikat Dasgupta, Rabindra Mukhopadhyay, Abhilash Guha, Preetom Sarkar, Tuhin Saha, Anil K Bhowmick Influence of highly dispersible silica filler on the physical properties, tearing energy, and abrasion resistance of tire tread compound, Journal of Applied Polymer Science, Volume 136, Issue 18, 2019, 47560
 
571 PR Sreenath, Saptarshi Mandal, Seema Singh, Prolay Das, Anil K Bhowmick, K Dinesh Kumar Remarkable synergetic effect by in-situ covalent hybridization of carbon dots with graphene oxide and carboxylated acrylonitrile-butadiene rubberPolymerVolume 175, 2019, Pages 283-293.
572 K Dinesh Kumar, MS Satyanarayana, Ganesh C Basak, Anil Bhowmick Adhesion between Compounded Elastomers: A Critical Review, Progress in Adhesion and Adhesives, 2019, Volume 4, Pages 99-191
573 Pranabesh Sahu, Anil K Bhowmick Redox Emulsion Polymerization of Terpenes: Mapping the Effect of the System, Structure and Reactivity Industrial & Engineering Chemistry Research, 2019, https://doi.org/10.1021/acs.iecr.9b02001
574 Tuhin Saha, Anil K Bhowmick, Takeshi Oda, Toshiaki Miyauchi, Nobuhiko Fujii Influence of layered nanofillers on the mechanical properties and thermal degradation of polyacrylicester polymer: Theoretical and experimental investigations, Composites Part B: Engineering, Volume 169, 2019, Pages 65-78.
575 Saikat Das, Santanu Chattopadhyay, Sawar Dhanania, Anil K Bhowmick Reactive grafting of 3-octanoylthio-1-propyltriethoxysilane in styrene butadiene rubber: Characterization and its effect on silica reinforced tire compositesPolymer, Volume 179, 2019, 121693.
 
576 Tuhin Saha, Anil K Bhowmick, Takeshi Oda, Toshiaki Miyauchi, Nobuhiko Fujii INFLUENCE OF NEW FLUOROACRYLATE CURE SITE MONOMER ON THE THERMAL AND MECHANICAL PROPERTIES OF THE POLYACRYLIC ESTER ELASTOMER, Rubber Chemistry and Technology, https://doi.org/10.5254/rct.19.80440

 

©2015, Prof. Anil K. Bhowmick. All rights reserved